Overview
The Pro Comp 3.5-inch Lift Kit with PRO-VST 2.5-inch Coilovers and Shocks with Rear Coil Spacers and Upper Control Arms, part number K5097BXU (EXPK5097BXU), is a 3 to 3.5-inch lift for the Toyota 4Runner and FJ Cruiser. It fits 2003 to 2009 4Runner models and 2007 to 2009 FJ Cruiser models.
The front and rear shocks are PRO-VST, and the kit uses 2.5-inch PRO-VST coilovers. Unlike the rear coil spring kits in the same line, this one uses rear coil spring spacers. The upper control arms are also included: American-made Pro Series arms with high-angle ball joints for better suspension travel and steering geometry.
The vehicle-specific tuning is designed for 33-inch tires on 17-inch wheels. The lift height range is 0 to 3.5 inches. The system improves travel and rebound and keeps the geometry in line for larger wheels and tires.
Key features
- 3 to 3.5-inch lift with a 0 to 3.5-inch lift height range
- 2.5-inch PRO-VST coilovers
- PRO-VST front and rear shocks, included
- Rear coil spring spacers
- Upper control arms included.
- Tuned for 33-inch tires on 17-inch wheels
Rear spacers and coil spring setups
Rear spacers raise the rear of a truck by adding height above the existing coil spring rather than replacing the spring itself. This keeps the current spring rate and can simplify the work at the rear, but the spring sits in a different place and its travel is shorter. Check the spring seat and shock mounting after installation so the components stay seated under load.
Spacers and coilover shocks change how the rear end moves, so the rear axle and driveline angles should be checked after installation. Inspect the spacer contact faces for cracks and look for shifting under load. Check the rear shock mounts for play during the first few drives, and retorque hardware after the initial break-in.
- Check spring seat seating after installation
- Inspect spacers for cracks or shifting
- Verify driveline angles at the rear axle
- Recheck rear hardware after the first drives
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | EXPK5097BXU (title K5097BXU) |
| Suspension type | Lift kit |
| Lift | 3 to 3.5 inches |
| Lift height range | 0 to 3.5 inches |
| Shocks | PRO-VST, front and rear, included |
| Coilovers | 2.5-inch PRO-VST |
| Rear lift component | Coil spring spacers |
| Tire size | 33 inch |
| Fitment | Direct fit |
Vehicle fitment
It fits the 2003-2009 Toyota 4Runner and the 2007-2009 Toyota FJ Cruiser. The kit does not cover 2010 and newer 4Runner models or 2010 and newer FJ Cruisers.
The list does not include 2010 and newer 4Runner models or FJ Cruisers from 2010 on. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The kit is a direct fit. Lifting the truck changes alignment and driveline angles, so plan a wheel alignment and a driveline check after installation.
What’s included
The lift kit with PRO-VST front and rear shocks, 2.5-inch coilovers, rear coil spring spacers and upper control arms, as the title describes.















