Overview
The ReadyLift 49-2763 is a 6.5-inch lift kit for 2017 to 2020 Ford Super Duty 4WD trucks with a two-piece driveshaft. It is a diesel kit with Bilstein shocks, and it is made for F-250 trucks with that driveshaft. The kit raises the front a total of 6.5 inches and accommodates tires up to 38 inches tall.
The front uses custom wound coil springs. Radius arm drop brackets let the owner keep the factory radius arms and correct caster, and OEM style cast iron rear lift blocks bring the rear level with the front. Premium Bilstein 5100 Series shocks are fitted at the rear, which ReadyLift describes as premium shocks. The kit also includes a drop pitman arm, a track bar bracket, sway bar end links and a drive shaft spacer, along with all hardware.
Key features
- 6.5 inches of front lift
- Two-piece driveshaft version
- Custom wound coil springs
- Radius arm drop brackets that correct caster
- OEM style cast iron rear lift blocks
- Bilstein 5100 Series rear shocks
- Drop pitman arm, track bar bracket and drive shaft spacer
Choosing the right setup
A diesel Super Duty carries more weight over the front axle than a gas truck, so the coil springs and radius arm drop brackets work harder under load. Choose a lift that matches the truck’s typical use, whether that is towing, hauling or mostly unloaded trail driving. The rear Bilstein 5100 Series shocks are ride height adjustable, which lets you set rear ride height to suit the load you carry.
Before installing, confirm the driveshaft type and the truck’s model, since the two-piece driveshaft and the F-250 or F-350 designation both affect the match. Check the rear blocks, U-bolts and bump stops for wear, and replace any cracked parts while the rear is raised. Recheck the alignment after front geometry changes, and inspect the rear driveline angles after the first few trips.
Specifications
| Brand | ReadyLift |
|---|---|
| Part number | RDY49-2763 |
| Lift kit size | 6.5 inches |
| Front spring | Custom wound coil springs |
| Rear shocks | Bilstein 5100 Series |
| Shock series | 5100 ride height adjustable series |
| Rear lift component | Block and U-bolt |
| Tire size | Up to 38 inches tall |
| Driveshaft | Two-piece only, per the product name |
| Fitment type | Direct fit |
Vehicle fitment
It fits 2017 to 2020 Ford F-250 and F-350 Super Duty models in the King Ranch, Lariat, Limited, Platinum, XL and XLT versions.
The kit is written for F-250 trucks, and 2017 to 2020 F-350 models are also covered. The 2021 Super Duty is not covered. Confirm the model and driveshaft type before ordering.
Installation notes
Radius arm drop brackets and the custom coil springs change front geometry, so an alignment should be checked after installation. The rear blocks and Bilstein shocks change ride height at the rear, so the driveline angles should also be checked.
What’s included
The kit includes the custom wound coil springs, the radius arm drop brackets, the OEM style cast iron rear lift blocks, the Bilstein 5100 Series rear shocks, the drop pitman arm, the track bar bracket, the sway bar end links and the drive shaft spacer.










