Overview
The ReadyLift 44-5860 is a 6-inch complete lift kit for the Toyota Tundra TRD Pro. The TRD Pro starts with 2 inches of factory front lift, so this kit adds 6 inches on top of that. The front ends up at the height of an 8-inch lift kit on a standard Tundra.
The kit keeps the factory TRD Pro suspension in place. The Bilstein coil-overs and reservoir rear shocks stay in use, so no shock swap is needed. The kit works with factory 20-inch wheels only, and aftermarket wheels can be used with the correct offset.
Key features
- 6 inches of front lift on top of the factory 2-inch TRD Pro lift
- Retains the factory Bilstein coil-overs
- Retains the reservoir rear shocks
- Works with factory 20-inch wheels only
- Aftermarket wheels allowed with the correct offset
- Complete lift kit with a block and U-bolt rear
Front height and alignment
A kit that adds height on top of a factory lift stacks the changes at the front. The front suspension angles, steering geometry and driveline angles all move, and the rear height usually needs to be checked against the front so the truck sits level. Check the truck at its finished height rather than relying only on the spacer measurement.
The factory Bilstein coil-overs and reservoir rear shocks are kept with this kit, so the existing damping stays in place. Shocks should still be checked for clearance at full compression and full extension, since the added height changes the travel range. Wheel choice matters, because factory 20-inch wheels are the fit reference for this setup.
- Check alignment and driveline angles after installation
- Verify front shock clearance at full compression
- Confirm wheel offset before fitting tires
- Recheck steering stabilizer and brake line slack at finished height
Specifications
| Brand | ReadyLift |
|---|---|
| Part number | RDY44-5860 |
| Front lift | 6 inches on top of factory 2-inch TRD Pro lift |
| Lift height range | 6 to 7 inches |
| Front shocks | Factory Bilstein coil-overs, retained |
| Rear shocks | Factory reservoir shocks, retained |
| Rear lift component | Block and U-bolt |
| Wheel fit | Factory 20-inch wheels only; aftermarket with correct offset |
| Fitment type | Direct fit |
Vehicle fitment
It fits 2015 to 2017 and 2019 to 2021 Toyota Tundra TRD Pro models.
Coverage is 2015 to 2018 TRD Pro trucks with Bilstein coil-over shocks, and 2019 to 2021 TRD Pro models are also in the fit range. Confirm the year and shock type before ordering.
Installation notes
Because the kit adds 6 inches of front lift to a truck already lifted from the factory, the alignment and driveline angles should be checked after installation. The factory 20-inch wheel requirement should be confirmed before fitting the tires.
What’s included
Front lift components and the block and U-bolt rear are included. Check the package contents against your installation before starting.









