Overview
The Power Stop Evolution JBR1584XPR (part number PSTJBR1584XPR) is a pair of front drilled and slotted brake rotors for the 2016–2022 Honda HR-V.
Drilled holes help the rotor shed heat under hard braking, rounded slots keep a clear contact patch, and silver zinc dichromate plating resists rust and corrosion. The rotors are built to match the original fit and vane count.
The rotor is a front rotor for the 2016–2022 Honda HR-V compact crossover. Each rotor is machined to tight run-out and thickness-variation limits, which affects pedal feel.
Run-out describes how much a rotor wobbles as it turns, and disc thickness variation (DTV) describes how much its thickness differs around the face. Lower figures for both generally point to a smoother pedal.
Key features
- Precision drilled holes allow rotor cooling under hard braking
- Rounded slots help wipe away gas and debris
- Silver zinc dichromate plating, except on hub assemblies
- Machined and mill-balanced
- Maximum run-out of 0.0032 in (0.08 mm) and DTV tolerance of 0.0005 in (0.0125 mm)
- Direct OE fit and vane count, supplied as a pair
Pedal feel and wear
Brake pedal feel comes largely from how true the rotor sits on the hub. Even a small side-to-side wobble can push the pedal and cause a steady pulse, and uneven thickness can produce the same effect. Machined and balanced rotors help prevent this, but the hub surface and wheel lug nuts still need to be clean and tightened evenly for the rotor to run true.
On a compact crossover like the HR-V, the front rotors are often the first brake parts to need replacement in busy traffic. Drilled holes help release heat, but they do not correct a warped rotor. If the pedal pulses after installation, check the hub surface and lug tightness before assuming the rotor is at fault.
- Clean the hub face and remove rust before fitting
- Tighten lug nuts in a star pattern
- Bed in new pads gradually
Specifications
| Brand | Power Stop |
|---|---|
| Part number | PSTJBR1584XPR |
| Product type | Front brake rotors, drilled and slotted |
| Position | Front |
| Coating | Silver zinc dichromate |
| Maximum run-out | 0.0032 in (0.08 mm) |
| Maximum DTV tolerance | 0.0005 in (0.0125 mm) |
| Quantity | Pair |
| Fit | Direct fit |
Vehicle fitment
The JBR1584XPR fits the 2016–2022 Honda HR-V in EX, EX-L, LX, Sport and Touring versions. One part number covers every model year from 2016 through 2022.
The first-generation HR-V sold before 2016 is not covered. Confirm fit for your vehicle’s year, model and trim before ordering.
Installation notes
Because the rotors match the original vane count and fit, they bolt on in place of the stock front rotors with no changes to the hub or caliper.
What’s included
One front axle pair.
Not included: Brake pads and mounting hardware.









