Overview
The Power Stop AR82153XPR is a front drilled and slotted brake rotor for 2011–2018 heavy-duty GM trucks, including the Chevrolet Silverado 2500 HD and 3500 HD and the GMC Sierra 2500 HD and 3500 HD.
Drilled and slotted rotors pair cross holes for cooling with slots that carry gas and dust away from the pad. This Evolution design suits street driving and day track use.
Key features
- Cross-drilled holes, which Power Stop says keep rotors up to 180°F cooler
- Rounded slots sweep water, gas and dust from the contact patch between pad and rotor
- Precision machined with Tru-Cast technology
- Runout within 0.0015 and DTV tolerance within 0.005
- Mill balanced Evolution rotor
- Silver zinc plating helps resist rust in normal operation
- G3000 grade cast construction
- Reduces fade under hard braking
- It looks finished behind custom or factory wheels.
Towing and heavy-duty braking
Heavy-duty trucks put far more load through their brakes than light pickups do, especially when towing a trailer down a long grade. Rotors in this class run hotter, so cross holes and slots help the friction surface shed heat and debris more quickly. Matching the rotor to a pad rated for heavy loads keeps stopping distances more predictable than a mix of parts.
Pad choice matters as much as the disc. A very hard compound can wear drilled rotors faster, while a soft pad may fade on a long descent. Check the caliper slide pins and brake hoses at the same service, since a sticking caliper can cause uneven rotor wear. Measure rotor thickness at each pad change and replace it when it falls below the minimum stamped on the hat.
Specifications
| Brand | Power Stop |
|---|---|
| Part number | AR82153XPR |
| UPC | 792088802378 |
| Product line | Power Stop Evolution |
| Position | Front |
| Rotor type | Slotted and cross drilled |
| Material | G3000 grade cast |
| Finish | Silver zinc plated |
| Runout | Within 0.0015 |
| DTV tolerance | Within 0.005 |
| Balance | Mill balanced |
| Coating | Coated |
| Cooling holes | Beveled, precision-drilled cross holes; Power Stop says they keep rotors up to 180°F cooler |
| Slots | Rounded slots that sweep a clear contact patch between pad and rotor |
| Manufacturing | Tru-Cast technology, precision machined |
| Fade | The rotor helps reduce fade under repeated braking. |
| Appearance | The finish suits both custom and factory wheels. |
| Plating note | All drilled and slotted rotors except hub and rotor assemblies are silver zinc plated |
| Fit | Direct fit |
Vehicle fitment
It is a front rotor for the 2011–2018 Chevrolet Silverado 2500 HD and 3500 HD (High Country, LT, LTZ and WT), the 2017–2018 Chevrolet Suburban 3500 HD (LS and LT), the 2011–2018 GMC Sierra 2500 HD and the 2011–2014 and 2016–2018 GMC Sierra 3500 HD.
Listed vehicles:
- 2011–2018 Chevrolet Silverado 2500 HD (High Country, LT, LTZ, WT)
- 2011–2018 Chevrolet Silverado 3500 HD (High Country, LT, LTZ, WT)
- 2017–2018 Chevrolet Suburban 3500 HD (LS, LT)
- 2011–2018 GMC Sierra 2500 HD (Base, Denali, SLE, SLT, WT)
- 2011–2014, 2016–2018 GMC Sierra 3500 HD (Base, Denali, SLE, SLT, WT)
Silverado and Sierra HD trucks built before 2011 are not covered by this rotor. Confirm fit for your vehicle’s year, model and trim before ordering.









