Overview
The Power Stop AR8643 is an OE style replacement brake rotor for 1999–2017 Chevrolet Silverado 1500 and a range of Silverado, Suburban, Sierra and Yukon XL models.
A brake rotor is the disc the brake pads clamp against to slow the vehicle. The AR8643 is an OE style replacement rotor with a smooth surface finish that shortens pad break-in time, and it is a direct-fit part.
The rotor is mill balanced for durability, suits non-aggressive driving, and is designed for quiet operation, low dust and long pad life. Check the axle position, diameter and thickness against your existing rotor before ordering.
Key features
- OE style replacement rotor
- Smooth surface finish for less pad break-in time
- Detailed castings with extractor and set screw holes where required
- Mill balanced for long-lasting durability
- Suited to non-aggressive driving
- Designed for quiet operation with low dust and long pad life
- It is designed to resist warping or cracking.
Choosing and replacing rotors
Rotors wear through friction and heat, and the surface gradually loses its flat, even face. Pads that grind against a worn rotor can lose braking consistency and make noise, so rotors are often replaced in pairs on the same axle. When you replace them, look at the hub face, the bolt holes and any lip on the outer edge, and clean rust or old pad material from the mounting surface before the new rotor goes on.
A smooth-finish rotor like this one suits a simple, quiet swap with a standard pad, and pads usually bed in more easily against a smooth face. Rotors and pads work as a matched system, so the pad compound and rotor finish should suit how the vehicle is driven. Heavy towing or aggressive driving may call for a different setup, and that is worth discussing with a parts specialist.
- Confirm the axle position before ordering
- Replace rotors in pairs on the same axle
- Clean the hub face and mounting surface
- Re-check lug nut tightness after the first drives
Specifications
| Brand | Power Stop |
|---|---|
| Part number | AR8643 |
| UPC | 792088356154 |
| Product type | OE style replacement brake rotor |
| Surface finish | Smooth |
| Balancing | Mill balanced |
| Extractor and set screw holes | Where required |
| Intended driving | Non-aggressive driving |
| Fitment type | Direct fit |
Vehicle fitment
The manufacturer fitment list for the Power Stop AR8643 rotor covers these vehicles, with the trim levels shown:
- 1999–2017 Chevrolet Silverado 1500 (Base, Custom, High Country, Hybrid, LS, LT, LTZ, SS, SSV, WT, XFE, Z71)
- 2007 Chevrolet Silverado 1500 Classic (Hybrid, LS, LT, SS, WT)
- 2001–2003, 2005–2006 Chevrolet Silverado 1500 HD (Base, LS, LT)
- 2007 Chevrolet Silverado 1500 HD Classic (LT)
- 1999–2004 Chevrolet Silverado 2500 (Base, LS, LT, WT)
- 2001–2017 Chevrolet Silverado 2500 HD (Base, High Country, LS, LT, LTZ, WT)
- 2007 Chevrolet Silverado 2500 HD Classic (LS, LT, WT)
- 2000–2013 Chevrolet Suburban 2500 (Base, LS, LT, LTZ)
- 2001–2003, 2005–2006 GMC Sierra 1500 HD (SLE, SLT)
- 2007 GMC Sierra 1500 HD Classic (SLE, SLT)
- 1999–2004 GMC Sierra 2500 (Base, SL, SLE, SLT, WT)
- 2000–2013 GMC Yukon XL 2500 (SLE, SLT)
The list covers specific Chevrolet and GMC 1500, 2500 and HD models and years only, and does not include other trucks or model years outside the ranges shown. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
- Because rotors play a part in stopping power, installation is best left to a qualified shop.
- Install rotors in left and right pairs per axle, and follow the standard procedure for your vehicle.
- Bed in new brake parts as the manufacturer directs, and re-check fasteners and brake performance after the first miles of driving.
- Confirm whether the rotor fits the front or rear axle before installing it.









