Overview
The Power Stop AR85153XPR is a front drilled and slotted brake rotor for the 2013–2017 Ford F-250 Super Duty and F-350 Super Duty. The AR85153XPR is made for the front axle, uses cross-drilled holes together with slots, and arrives coated.
The drilled holes help keep rotor temperatures up to 180°F cooler, and the rounded slots clear water, gas and dust so the pad keeps a clear contact patch.
In Power Stop’s own wording, the AR85153XPR belongs to its Evolution line, where every rotor is mill balanced and the drilled and slotted face is meant to look good behind custom or factory wheels.
Its cross-drilled and slotted face suits street and day track use, pairing drilled-hole cooling with slots that clear gas and dust.
Key features
- Cross-drilled holes for cooling
- Rounded slots clear water, gas and dust
- Silver zinc plating resists rust
- G3000 grade casting
- Tru-Cast precision machining
- Beveled, precision-drilled holes
- Reduces brake fade
- Evolution rotor, mill balanced
- Run out within 0.0015, DTV tolerance within 0.005
- Direct-fit design
Pads and bedding-in
A front rotor does most of the stopping work on a heavy Super Duty, so pad choice matters as much as the rotor itself. Pads should suit the weight of the truck and the kind of driving it does, whether that is towing, daily commuting or the occasional trail run. Drilled and slotted faces can wear pads at a different rate than a plain face, so inspect pad thickness at each brake service.
Bedding in new pads helps material transfer evenly onto the rotor and prevents uneven spots that cause vibration. Make several moderate stops from a moderate speed, then allow the brakes to cool before any hard stop.
Cracks near the cross-drilled holes, a rough or grooved face and a pedal that pulses under braking are reasons to inspect the front rotors. Replace them in left and right pairs so both sides brake the same way.
Specifications
| Brand | Power Stop |
|---|---|
| Part number | AR85153XPR |
| UPC | 792088819185 |
| Type | Slotted and cross drilled |
| Position | Front |
| Coating | Coated |
| Finish | Silver zinc plated |
| Material | G3000 grade casting |
| Machining | Tru-Cast precision machined, mill balanced |
| Tolerances | Run out within 0.0015; DTV within 0.005 |
| Drill holes | Beveled and precision drilled |
| Slots | Rounded slots sweep water, gas and dust |
| Cooling | The drilled holes help keep rotors up to 180°F cooler. |
| Line | Evolution |
| Fit | Direct fit |
Vehicle fitment
The AR85153XPR fits 2013–2017 Ford F-250 Super Duty (King Ranch, Lariat, Platinum, XL, XLT) and 2013–2017 Ford F-350 Super Duty (King Ranch, Lariat, Platinum, XL, XLT).
It is a front rotor and does not cover the rear axle. It fits only the 2013–2017 model years listed here, so match your year, model and trim before ordering.
Installation notes
Install the AR85153XPR on the front axle only, and plan on fresh brake pads, since a drilled and slotted face works with pads that are in good condition.












