Overview
The Power Stop Evolution AR8649XPR is a set of drilled and slotted front brake rotors for GM mid-size SUVs, including the 2002-2005 Chevrolet Trailblazer, 2002-2004 GMC Envoy, 2004-2005 Buick Rainier, 2004-2005 Isuzu Ascender and 2002-2004 Oldsmobile Bravada. The vented cast iron rotors have six lugs.
The drilled holes allow cooling and help keep brake temperatures down under heavy use, while the rounded slots wipe away gas and debris to keep a clear contact patch.
The rotors are machined and mill balanced, and the company guarantees fit for the vehicle.
The AR8649XPR covers five badge-engineered SUVs that share one front brake design, namely the Trailblazer, Envoy, Rainier, Ascender and Bravada. Power Stop gives these rotors a drilled and slotted face for owners who want more than a plain OE replacement, and the vented construction passes air through the disc. The vehicle list is year-specific, so check the model year before choosing the set, and note the rotors are a front-axle part. Power Stop also publishes a maximum run-out and DTV tolerance for this set, which are given in the specifications table. Owners of an Envoy or a Bravada should note those two models are listed through 2004 only, while the Trailblazer runs through 2005, as do the Rainier and Ascender.
Key features
- Slotted and cross-drilled front rotors
- Vented cast iron, 6 lugs
- 2 wheel set, coated
- Silver zinc dichromate plating
- Rounded slots clear gas and debris
- Maximum run-out 0.0032 in (0.08 mm)
Choosing a front rotor
Mid-size SUVs with six-lug front hubs often share brake hardware across several badges, so the rotor fit should be confirmed against the exact year and model. Vented construction places cooling fins between the two faces, which helps when the vehicle is used for towing or steep grades. Measure rotor thickness and runout before reuse, because a rotor that is thin or warped can cause pulsation even when the pads are new.
Rotor replacement is often paired with pads, hardware and sometimes brake fluid. Clean the hub face to remove rust and debris, and use fresh pad hardware. A rotor that is thin, grooved or heat-cracked should be replaced rather than resurfaced when it no longer meets its minimum thickness.
- Confirm the model year before ordering
- Clean the hub and remove any rust ridge
- Replace pads and rotors together for even wear
- Check the wheel bearing if pulsing persists after installation
Specifications
| Brand | Power Stop |
|---|---|
| Part number | PSTAR8649XPR |
| Part type | Evolution drilled and slotted brake rotors |
| Disc material | Cast iron |
| Style | Vented |
| Position | Front |
| Number of lugs | 6 |
| Quantity | 2 wheel set |
| Coating | Coated |
| Maximum run-out | 0.0032 in (0.08 mm) |
| Maximum DTV tolerance | 0.0005 in (0.0125 mm) |
Vehicle fitment
It fits the 2004-2005 Buick Rainier, 2002-2005 Chevrolet Trailblazer, 2002-2004 GMC Envoy, 2004-2005 Isuzu Ascender and 2002-2004 Oldsmobile Bravada.
The Envoy and Bravada fit through 2004 only, and Trailblazer EXT and later models are not covered. Confirm fit for your vehicle’s year, model and trim before ordering.
What’s included
Two front rotors for the left and right wheels.









