Overview
The Power Stop AR8752XPR is a rear slotted and cross-drilled brake rotor for the 2007–2009 Chrysler Aspen, 2004–2009 Dodge Durango, 2002–2010 Dodge Ram 1500 and 2011–2018 Ram 1500. Evolution rotors from Power Stop are mill balanced, and their drilled and slotted faces are finished with silver zinc plating.
The AR8752XPR is a rear rotor with a slotted and cross-drilled face, made to replace a plain disc on the 2007–2009 Chrysler Aspen, 2004–2009 Dodge Durango, 2002–2010 Dodge Ram 1500 and 2011–2018 Ram 1500.
Matching a rotor to your vehicle by year, model and axle matters more than any single feature, because mounting dimensions differ between models.
Key features
- Slotted and cross-drilled rear rotor
- Direct fit for the listed vehicles
- Coated rotor
- Rounded slots that sweep water, gas and dust from the pad contact patch
- Silver zinc plated to shield against rust during normal operation
- Cross-drilled holes that Power Stop says keep rotors up to 180°F cooler
- Mill balanced
- Looks good behind custom or factory wheels
- Tru-Cast precision machining
Rear rotor heat and balance
Rear rotors carry a smaller share of braking than fronts on most trucks, but they still absorb heat on every stop. A slotted face gives dust, water and gas a way out, while cross-drilled holes add some airflow. Both features help keep the pad surface working, though they do not replace good pad material.
Rear discs often sit close to the parking brake parts on many vehicles, so check the hub, the rotor’s mounting face and any parking brake components while the rotor is off. Clean rust from the hub face so the disc sits flat.
Rear pads usually wear more slowly than front pads, so a rotor may need replacing while the pads still have life. Look for deep grooves, a ridge at the outer edge or a pulsing pedal as signs of wear.
- Clean the hub face before fitting
- Check parking brake parts if equipped
- Replace rear rotors in pairs
Specifications
| Brand | Power Stop |
|---|---|
| Part number | AR8752XPR |
| UPC | 792088554178 |
| Product type | Slotted and cross-drilled disc brake rotor |
| Position | Rear |
| Fit type | Direct fit |
| Coating | Rotors coated |
| Casting | G3000 grade cast |
| Plating | Silver zinc |
| Machining | Tru-Cast precision machined |
| Rotor run-out | Within 0.0015 |
| DTV tolerance | Within 0.005 |
| Balance | Mill balanced |
Vehicle fitment
It fits the following vehicles and trims: 2007–2009 Chrysler Aspen (Limited, Limited Hybrid); 2004–2009 Dodge Durango (Adventurer, Limited, Limited Hybrid, SE, SLT, ST, SXT); 2002–2010 Dodge Ram 1500 (Laramie, SLT, ST, SXT, Sport, TRX, TRX4); 2011–2015, 2017–2018 Ram 1500 (Big Horn, Express, HFE, Laramie, Laramie Limited, Laramie Longhorn, Limited, Lone Star, Outdoorsman, R/T, Rebel, SLT, ST, Special Service, Sport, Tradesman).
Measure the old rotor’s diameter, thickness and bolt pattern and match them to this rear rotor before installing.
Covered Ram 1500 years are 2011–2015 and 2017–2018. Verify that your year, model and trim are included before buying.
Installation notes
Compare the old rotor against the new one before mounting to confirm the hub opening and vane design match.
What’s included
The AR8752XPR is a Power Stop brake rotor, sold as the rotor only.
Not included: Pads, calipers and hardware are separate parts and are not included.









