Overview
The Poison Spyder 13-16-020-DC is a BFH front bumper with shackle tabs and a Comp Stinger, in bare steel, for the 1987–1995 Jeep Wrangler YJ. The stinger is a hoop at the front that Poison Spyder says gives even better forward-roll prevention and extra protection for the radiator area and engine compartment in a rollover.
The bumper itself is CNC laser-cut from a single piece of 3/16″ plate steel, is no wider than the frame rails and has an integrated winch mount. The shackle tabs are 1″ thick plate steel for 3/4″ recovery shackles.
The Comp Stinger for the BFH front bumper matches the lines of the stand-alone Comp Stinger and suits drivers working on the harder side of the sport. The bumper is brake-formed for an exact fit and built for ground clearance, tire clearance and approach angle.
The recovery shackle tabs are engineered to match the angles of the bumper, so there is no loss in approach angle.
Key features
- Comp Stinger included for forward-roll prevention
- Protects the radiator area and engine compartment in a rollover
- 3/16″ plate steel bumper, no wider than the frame rails
- Integrated winch mount
- 1″ thick plate steel shackle tabs for 3/4″ shackles
- Bare steel
Stinger clearance and the hood line
A stinger on a bumper with a winch mount works in two directions. The hoop reaches forward to protect the grille and radiator area, and it reaches up to help limit forward roll on steep ground. Measure the hoop’s reach against your hood, grille and headlights, and check that the steering can turn freely with the stinger in place.
Because the stinger and the bumper share a base, any damage affects both parts. Inspect the base plates, hoop joints and bolts after heavy use, and look for cracks around the stinger mounting points. Keep bare steel coated to limit rust, and retighten fasteners after the first few trail runs. Confirm your winch cable and tow points still clear the stinger.
- Hood and headlight clearance checked
- Base and hoop joints inspected after hard use
- Winch cable path clear of the stinger hoop
Specifications
| Brand | Poison Spyder Customs |
|---|---|
| Part number | 13-16-020-DC |
| UPC | 614901724479 |
| Product type | Front bumper with shackle tabs and Comp Stinger |
| Position | Front |
| Material | Steel, 3/16 inch plate |
| Finish | Bare |
| Width | Stubby, no wider than the frame rails |
| Winch mount | Integrated |
| Shackle tabs | 1 inch thick plate steel, for 3/4 inch recovery shackles |
| Stinger | Comp Stinger |
Vehicle fitment
The 13-16-020-DC is made for the 1987–1995 Jeep Wrangler (YJ).
Measure the stinger’s forward reach and height against your clearance needs before ordering. TJ, LJ, JK and JL Wranglers are not covered. Confirm fit for your vehicle’s year, model and trim before ordering.
What’s included
- BFH front bumper with integrated winch mount
- Comp Stinger
- Recovery shackle tabs
Not included: Winch, shackles and any paint or coating.
















