Overview
The Poison Spyder BFH front bumper 14-16-020-D is a bare steel bumper with 1″ thick shackle tabs for the 1997–2006 Jeep Wrangler TJ and 2004–2006 Wrangler Unlimited LJ. It is built for hardcore four-wheelers who value strength, simplicity and function, and the BFH name stands for Built For the Hammers.
The one-piece bumper is CNC laser-cut from 3/16″ high strength plate steel and brake-formed. It is no wider than the frame rails and has an integrated winch mount.
The BFH is brake-formed for an exact fit, with angled facets that help it slide over rocks. The design is built for maximum ground clearance, tire clearance and approach angle within its layout.
The recovery shackle tabs are engineered to match the angles of the bumper, so there is no loss in approach angle.
The one-piece bumper is aimed at hardcore four-wheelers, with an integrated winch mount, and it is supplied in bare steel.
Key features
- CNC laser-cut single piece of 3/16″ plate steel
- Integrated winch mount
- Angled facets help the bumper slide over rocks
- Shackle tabs of 1″ thick plate steel
- Tabs sized for 3/4″ recovery shackles
- Bare steel
Recovery and winching setup
A front bumper with integrated winch mount is most useful when the winch, mount, shackles and tow points are chosen as one system. The shackle tabs are sized for 3/4 inch shackles, so pick shackles that match them and are rated for the expected load. Tow points work best when pulled straight, so line up the winch with the bumper centerline.
Frame-width bumpers leave the sides of the vehicle open to rocks, so pair the bumper with side protection on the rockers and body where you run tight trails. Keep the winch cable clear of the bumper edges and the hood, and use a damper or a rated recovery strap as a second layer when the line is under load.
Inspect the shackle tabs and welds after recovery work, since a hard pull can bend the tabs or stress the mounting points. Keep the winch wiring and remote tidy, and check fasteners after early trail use.
- Pull straight to the centerline
- Match shackle size to tab size
- Inspect tabs after heavy pulls
Specifications
| Brand | Poison Spyder Customs |
|---|---|
| Part number | 14-16-020-D |
| UPC | 614901725773 |
| Product type | Front bumper with shackle tabs |
| Position | Front |
| Material | Steel, 3/16 inch plate |
| Finish | Bare |
| Width | Stubby, no wider than the frame rails |
| Winch mount | Integrated |
| Shackle tabs | 1 inch thick plate steel, for 3/4 inch recovery shackles |
Vehicle fitment
It is a fit for the 1997–2006 Jeep Wrangler (TJ) and the 2004–2006 Jeep Wrangler (LJ).
The YJ and the JK and JL generations are not in the listed fitment. Confirm your vehicle’s year, model and trim before ordering.
What’s included
- BFH front bumper with integrated winch mount
- Recovery shackle tabs
Not included: Winch, shackles and any paint or coating.









