Overview
It is a bare steel mid-width high clearance bumper for the Jeep Wrangler JK, part number 17-63-010. Its ends reach farther outboard than the Brawler Lite, to about half the width of the tires, for more brush protection at the grille corners and fenders.
The bumper is fabricated from 3/16″ plate steel and has recessed all-steel buckets for re-mounting the factory fog lamps. It is designed to accept most Warn winches and others that follow Warn’s standardized mounting dimensions.
Poison Spyder says Brawler Mid comes with provisions for re-mounting the factory fog lamps: recessed fog lamp buckets made of CNC laser cut tubing with a mounting flange to accept the stock lamp hardware. The recess and the all-steel buckets help protect the lamps from rocks.
The winch sits in a slight depression on the top surface of the bumper, with CNC laser cut plate steel gusseting inside the bumper shell directly under the winch for strength. The Winch Fairlead Mount is a separate item, so owners who do not run a winch keep a clean top surface.
Key features
- Ends reach about half the width of the tires
- Recessed all-steel fog lamp buckets protect the factory lamps
- Accepts most Warn winches and Warn-pattern winches from others
- Plate steel gusseting under the winch
- Winch Fairlead Mount is a separate item
- Bare steel, no D-ring mounts
Brush protection and fog lamps
Wider ends change how a bumper meets brush and trail edges. Ends that reach farther outboard protect the grille corners and fenders from branches, but they also widen the bumper’s footprint, so check that it clears the tire and fender edges at full steering lock before final mounting.
Factory fog lamps are often re-mounted in recessed buckets. Keep the lamp wiring away from the bumper’s inner edges, and inspect the lamp housings after brushy runs. Lenses are the part most likely to chip, so a clear cover is worth considering if the lamps see heavy use.
Bare steel and the winch area both benefit from an early check. Look for chips, flaking coat or small rust spots, and touch them up before they spread. Keep the fairlead mount bolts tight, since a separately mounted fairlead can loosen on rough tracks.
Specifications
| Brand | Poison Spyder Customs |
|---|---|
| Part number | 17-63-010 |
| UPC | 614901727371 |
| Product type | Front bumper |
| Position | Front |
| Material | Steel, 3/16 inch plate |
| Finish | Bare, to be painted or powder coated before installation |
| Width | Mid-width |
| D-ring mounts | Not included |
| Body styles | 2-door and 4-door |
| Fit type | Direct fit |
Vehicle fitment
The Brawler MID front bumper is made for the 2007–2018 Jeep Wrangler (JK).
Other Wrangler generations (YJ, TJ, LJ, JL) fall outside this fitment. Confirm fit for your vehicle’s year, model and trim before ordering.
Installation notes
Paint or powder coat the bare steel before final installation. The Winch Fairlead Mount is a separate item.
What’s included
- Brawler Mid front bumper
- Recessed fog lamp buckets
Not included: D-ring mounts, Winch Fairlead Mount and winch.









