Overview
The Omix-ADA Replacement Steel Fender, part number 12004.15, is a driver-side front steel replacement fender for the 2004-2006 Jeep Wrangler (LJ) Unlimited and the 1997-2006 Wrangler (TJ).
Omix-ADA says replacement steel body parts are sold as is, and that some minor imperfections or damage can occur. Professional installation is recommended. The attributes list the location as driver side and the position as front left.
Key features
- Replacement steel fender for a Jeep Wrangler
- Driver side location, front left position
- Steel body part
- Direct fit for the listed Wrangler LJ and TJ models
- Omix-ADA recommends professional installation
Body panel fit and finish
A replacement fender sits between the hood, the headlight area and the door, so small alignment errors show quickly. Hang the panel loosely, set the gaps with the hood closed, and only then snug the bolts. Bare steel rusts fast on the inner edges, so prime those areas before the final coat.
Fenders also carry the wiring for the front lights and the marker lamps on many trucks. Disconnect the original harness carefully, label each connector, and keep the old hardware in order so it can be reused if the new part needs a second fit.
- Dry-fit the panel before painting
- Set gaps with the hood and door closed
- Prime bare steel on inner edges
- Label connectors when removing the old fender
Specifications
| Brand | Omix-ADA |
|---|---|
| Part number | 12004.15 |
| UPC | 804314133108 |
| Product type | Replacement steel fender |
| Material | Steel |
| Location | Driver side |
| Position | Front left |
| Fitment type | Direct fit |
Vehicle fitment
The manufacturer fitment list for the 12004.15 covers: 2004–2006 Jeep Wrangler (LJ) (Unlimited, Unlimited Rubicon); 1997–2006 Jeep Wrangler (TJ) (65th Anniversary Edition, Rubicon, SE, Sahara, Sport, X).
The list covers only the Wrangler LJ (Unlimited and Unlimited Rubicon) and TJ entries shown. It does not cover the YJ, JK or JL, and this is a driver-side fender only. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Test-fit body panels before tightening or painting. A professional installer is the safer choice where the part affects structure or safety. Tighten all fasteners to the torque values for your vehicle, and re-check them after the first miles of driving and again after off-road use. Check that doors, hood and lights still operate freely once the part is fitted.
Test-fit the fender before final tightening so the gaps with the hood, door and cowl are even. Replacement steel body parts may need paint or primer for corrosion protection, so check the finish on arrival and protect any bare steel promptly. Disconnect and reconnect any lights or wiring attached to the original fender carefully, and keep the original hardware in order for reinstallation.
What’s included
One front driver-side steel fender, sold as is.
Not included: Paint, fender flares, lights and mounting hardware are not included.
