Overview
The Crown Automotive J5758618 is a driver side, front left replacement steel fender for Jeep CJ5 and CJ7 vehicles. It is a 16-gauge steel body panel that comes with a rust inhibitor primer only, so it has to be primed again before it is painted to match the body.
It is a direct fit for several early CJ-style bodies, including the 1972–1975 Jeep CJ6 and the 1981–1985 Jeep Scrambler, which makes it a practical choice for those vehicles as well.
Key features
- 16-gauge steel fender panel
- Driver side, front left position
- Rust inhibitor primer applied; priming is needed before paint
- Direct-fit replacement per the manufacturer fitment list
Rust on older CJ bodies
On CJ-style Jeeps the fenders sit above the frame and in the path of road grit, so rust often appears along the lower edge and around the headlight bucket. Inspect the surrounding inner fender and cowl before fitting a replacement, because new steel will not stop rust that is already spreading into the body.
A panel with rust inhibitor primer still needs a topcoat before it is exposed to weather. Use a primer suited to bare steel, feather the edges of the surrounding paint, and check the alignment with the hood and grille before the final coat goes on.
- Check the cowl and inner fender for rust
- Prime and topcoat before exposure
- Align with the hood and grille before final paint
Specifications
| Brand | Crown Automotive |
|---|---|
| Part number | J5758618 |
| UPC | 848399066371 |
| Material | Steel |
| Thickness | 16-gauge |
| Finish | Primed with rust inhibitor (not painted) |
| Position | Driver side, front left |
| Fit type | Direct fit |
Vehicle fitment
It fits the 1972–1983 Jeep CJ5 (Base, Golden Eagle, Laredo, Limited, Renegade), the 1972–1975 Jeep CJ6 (Base), the 1976–1986 Jeep CJ7 (Base, Golden Eagle, Golden Hawk, Laredo, Limited, Renegade) and the 1981–1985 Jeep Scrambler (Base, Laredo, Renegade, SL, SR).
Other Jeep generations, such as the Wrangler YJ, are not on this list, and CJ5 or CJ7 years outside the ranges above are not covered. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Plan on priming and painting the panel before it is bolted on, since the factory finish is a rust inhibitor only. Check the fit against the adjacent panels before final paint goes on.
What’s included
One driver side, front left steel fender panel for part number J5758618. Check the package contents against your installation before starting.
Not included: finish paint for the primed panel.









