Overview
The Crown Automotive 55175664AB is a steel rear corner panel for the passenger side of Jeep Wrangler LJ and TJ models. It is black primer coated, so it is a body panel that still needs finish work before it matches the vehicle.
The panel is a direct fit for the LJ and TJ generations. Minor imperfections or damage can occur in transit, and an experienced installer or body shop is the better choice for a steel body panel like this.
Key features
- Steel rear corner panel for the passenger side
- Black primer coated surface
- Covers the 2004–2006 Wrangler LJ and 1997–2006 Wrangler TJ
- Position right, location passenger side
Preparing a primed body panel
A black primer coat protects bare steel while the panel waits to be installed, but it is not a finished surface. Before the panel goes on, scuff the primer lightly where a topcoat will bond and wipe the surface clean. Check the panel’s edges and welded seams for any transit damage.
Rear corner panels sit near the wheel well, the rear quarter and the taillight area, so they see road spray and stone impact. Matching the panel’s gaps to the rear door, tailgate and bumper usually takes a few test fits. Seal and undercoat the back of the panel once it is aligned to slow corrosion from the inside.
Paint matching is easier when the adjacent panels are sanded and prepped at the same time. Ask a body shop about blending the topcoat across the rear quarter if the color on the rest of the vehicle has faded.
Specifications
| Brand | Crown Automotive |
|---|---|
| Part number | 55175664AB |
| UPC | 848399084955 |
| Material | Steel |
| Finish | Black primer coated |
| Position | Right |
| Location | Passenger side (rear) |
| Fitment type | Direct fit |
Vehicle fitment
Covers the 2004–2006 LJ, Unlimited and Unlimited Rubicon versions, and the 1997–2006 TJ across its X, Sport, Sahara, SE, Rubicon and 65th Anniversary trims.
The list does not include the 1987–1995 Wrangler (YJ), any Jeep Cherokee, or the driver side panel. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The black primer coat is not a finished paint, so paint work is a separate step after the panel is fitted. Crown recommends professional installation for this body panel.
What’s included
One passenger side rear steel corner panel. Confirm hardware and paint needs before installation.
