Overview
The Kleinn Train Horns 6260 is a sealed 120 psi air compressor system with a 0.5 gallon tank, made to power train horns and truck horns. It is the lower-cost sealed system in the Kleinn line. It is an air compressor kit rather than a vehicle-specific part, so it is not built for one make, model or year.
The compact unit is small enough to fit in many vehicle spaces while still delivering the output needed for train and truck horns. The compressor is built for a high output that cuts recharge time to 28 seconds. The air tank has five ports and is set up so a drain port sits on the bottom in any mounting position.
Key features
- Sealed 120 psi compressor with a 0.5 gallon air tank
- Pressure switch settings of 90/120 psi
- CFM at 0 psi rated at 1.03
- Recharge time of 28 seconds.
- Air tank with five ports and a bottom drain port in any mounting position
- Remote mount intake filter included
- Duty rating of 9%
Sizing the air supply for horns
The duty rating tells you how much of its time a compressor can run before it needs a rest. A low duty rating means the compressor can overheat if it is left running for long periods, so short, deliberate horn blasts suit a system like this one. A small tank gives less reserve air, so repeated blasts drain pressure faster than a larger tank would. Matching the horn load to the air supply helps the system recover between uses.
Wiring and plumbing matter as much as the compressor itself. A fuse and wire sized for the unit’s draw protect the electrical side, and the pressure switch keeps the tank within its limits. Check that hoses and fittings are tight, and keep the drain cock clear so moisture does not collect. This unit has no built-in thermal protection, so let it cool between long runs.
- Use a fuse matched to the unit’s draw
- Drain the tank after wet weather
- Inspect hoses for cracks at each service
- Keep the remote mount intake filter clean
Specifications
| Brand | Kleinn Train Horns |
|---|---|
| Model | 6260 |
| UPC | 854508003045 |
| Compressor dimensions | 7.5 L x 2.1 W x 4.3 H in |
| Tank dimensions | 6.5 L x 5.75 W x 8 H in |
| Tank capacity | 0.5 gallons |
| Max pressure | 120 psi |
| Pressure switch settings | 90/120 psi |
| Duty rating | 9% |
| CFM @ 0 psi | 1.03 |
| Amp draw | 10 |
| Thermal protection | No |
| Weight | 9 lbs. |
Vehicle fitment
The Kleinn Train Horns 6260 is an air compressor system and is not vehicle-specific, so no year, make or model fitment is listed. Its 120 psi maximum pressure and 9% duty rating are the limits to match against your horn setup, rather than a vehicle list.
The kit is not tied to a vehicle list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The kit includes mounting brackets and hardware, so the compressor and tank can be mounted with the supplied parts. The tank’s five ports and bottom drain port let you drain the tank whichever way it is mounted. Wire the unit with a fuse and wire sized for its listed 10 amp draw, and keep the 120 psi maximum in mind when plumbing the horns.
What’s included
The kit includes the compressor, air tank, pressure switch, safety valve, compression fitting, drain cock, remote mount intake filter, and mounting brackets with hardware.
Not included: Train and truck horns are not part of this kit.









