Overview
The Kleinn Train Horns SDKIT-734 is a train horn and onboard air system kit built around a Demon Model 730 triple steel train horn, a 150 PSI air compressor and a 3 gallon steel air tank. It is a bolt-on package for under-truck mounting and works with tires up to 35 inch.
The kit is 100% bolt-on and uses a 100% duty cycle air system. Basic hand tools are all you need, and everything for the installation comes in one box, including the horns, compressor and tank. The kit cannot be used with powered side steps.
Key features
- Demon Model 730 triple steel train horn
- 150 PSI air compressor, 1.66 CFM
- 3 gallon steel air tank with Cortec interior anti corrosion coating
- Bolt-on installation with no drilling or modifications.
- Vehicle specific brackets for under-truck mounting
- Includes fittings, air lines, hardware and a tire inflation kit
- Not compatible with powered side steps
Before you install
Under-truck air systems sit in a harsh spot, close to road spray, salt and stones. A steel tank with an interior anti corrosion coating resists rust on the inside, but the outside still needs attention. Rinse the tank and brackets after wet or salted roads, and look for chips in the paint where stones may have struck.
Plan the layout before the first bolt goes in. Keep air lines away from the exhaust and sharp frame edges, and leave room to reach the drain and fittings later. Because the horn and compressor share the same air supply, running the horn and inflating tires together draws the tank down faster than either alone.
- Rinse the tank and brackets after salted roads
- Touch up chipped paint on exposed steel
- Keep air lines clear of the exhaust
Specifications
| Brand | Kleinn Train Horns |
|---|---|
| Part number | SDKIT-734 |
| UPC | 819147011097 |
| Horn | Demon Model 730 triple steel train horn |
| Compressor | 150 PSI, 1.66 CFM |
| Air tank | 3 gallon steel with Cortec interior anti corrosion coating |
| Tire size | Up to 35 inch |
| Mounting | Under truck, bolt-on, vehicle specific brackets |
| Drilling | Not required |
Vehicle fitment
This kit is direct fit, using vehicle specific brackets for under-truck mounting.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The vehicle specific brackets must match your truck, so confirm they fit before starting. The kit cannot be used with powered side steps, so check that equipment first.
What’s included
Horns and compressor with tank, all fittings, air lines, hardware and a tire inflation kit.









