Overview
The Kleinn Train Horns 230 is a triple train horn with detachable trumpets, made of black high impact ABS. It runs on a Vortex 4 12-volt DC solenoid and needs a compressor and air tank to operate.
The flat rack design needs 40% less clearance than the 500 Series train horns. The trumpets separate from the mounting brackets, which helps vehicles with limited space. It is universal / direct fit.
Key features
- Triple train horn in black high impact ABS
- Detachable trumpets for tight installs
- Flat rack design needs 40% less clearance than 500 Series train horns
- Vortex 4 12-volt DC solenoid
Trumpet spacing and mounting
Separating the trumpets from the mounting brackets can make a horn fit where a single full size unit would not. Before cutting or drilling, mark each trumpet location and measure the air line route between the trumpet and the compressor. Give the air line a gentle bend, not a sharp kink, because restricted flow weakens the blast. Plan the layout on paper first so each trumpet has room to sit.
Keep the trumpets pointed in a clear direction and secure each bracket to a solid part of the frame or body. Vibration from the road can loosen brackets, so use lock washers or thread locker where appropriate. Recheck the mounting after the first few drives.
- Mark trumpet locations before drilling
- Avoid sharp bends in the air line
- Recheck brackets after the first drives
Specifications
| Brand | Kleinn Train Horns |
|---|---|
| Model | 230 |
| Horn type | Triple train horn |
| Construction | High impact ABS |
| Finish | Black |
| Max input | 175 psi |
| Output | 150.6 dB at 100 psi; 153.3 dB at 150 psi |
| Solenoid | Vortex 4 12-volt DC |
Vehicle fitment
Universal / direct fit is listed, so no particular vehicle is named. The detachable trumpets are intended for vehicles that could not otherwise fit full-size train horns, so check your mounting space first.
Installation notes
The trumpets separate from the mounting brackets, which helps in tight spaces. The 12-volt DC solenoid is the electrical connection to wire, and a compressor and air tank must be supplied for the horn to run. Disconnect the battery before wiring the solenoid.
What’s included
Triple train horn with detachable trumpets.
Not included: a compressor and air tank, which the horn needs to run.









