Overview
The Kleinn Train Horns 730 is a black triple train horn with valve, a universal fit air horn that needs a separate compressor and air tank to run.
The three tuned trumpets measure 18.5 inches, 14.75 inches and 10.5 inches and are built to produce a layered train horn sound. The horn suits vehicles where a full-size train horn would be hard to fit.
Key features
- Three tuned trumpets for a layered train horn sound
- Detachable trumpets that can be separated from the mounting brackets for installation in vehicles that could not otherwise fit full-size train horns
- Heavy-duty steel mounting brackets for under-body or rooftop mounting
- Includes a Vortex 7 12-volt heavy-duty brass body solenoid
- Maximum input of 175 psi
- Trumpets are chrome-plated spun copper.
Sizing the air system
A train horn is a heavy load on its air supply, so the compressor and tank should be matched to the horn’s maximum input. Plan the supply around the 175 psi maximum input rather than the lowest pressure you expect. A tank that is too small will cycle the compressor often, which shortens the life of its motor and seals.
Think about the whole route from compressor to horn. Tubing should run away from hot exhaust parts and sharp edges, and fittings should be checked for leaks once the system is charged. Because the trumpets separate from their brackets, keep the connections accessible so the solenoid can be serviced without removing the trumpets.
- Match the compressor to the 175 psi maximum input
- Keep tubing clear of exhaust heat
- Protect the solenoid from road water
- Check trumpet brackets for loosening after rough roads
Specifications
| Brand | Kleinn Train Horns |
|---|---|
| Model | 730 |
| UPC | 819147010199 |
| Horn style | Black triple train horn with valve |
| Trumpet lengths | 18.5-inches, 14.75-inches and 10.5-inches |
| Trumpet material | Chrome-plated spun copper |
| Construction | High Impact ABS |
| Mounting | Heavy-duty steel brackets, under-body or rooftop |
| Maximum input | 175 psi |
| Solenoid | Vortex 7, 12-volt, heavy-duty brass body |
| Operation | Compressed air; compressor and air tank required |
Vehicle fitment
This is a universal fit accessory rather than a vehicle-specific part. Kleinn Train Horns gives no year, make or model for it, so fit depends on the mounting space available on your vehicle.
Check that you have room for the trumpet lengths and the mounting brackets before installing.
Installation notes
Plan the air system around the 175 psi maximum input. The solenoid is a 12-volt part, so plan the wiring and a fuse before mounting the trumpets. Confirm the trumpet material on your unit before installing. Air tanks hold pressure, so release it before servicing the system.
What’s included
The triple train horn with valve, detachable trumpets, heavy-duty steel mounting brackets and the Vortex 7 12-volt heavy-duty brass body solenoid.
Not included: A compressor and an air tank.









