Overview
The Icon Suspension Billet Aluminum Uniball Upper Control Arm Kit, part number 58551, is a front upper control arm kit for the 07+ Toyota FJ Cruiser platform. The arms are CNC-machined from 6061 billet aluminum and are adjustable on the vehicle.
The factory ball joints limit usable suspension travel on the FJ Cruiser. These arms use 1-inch PTFE-lined stainless uniballs with 17-4 stainless steel taper pin adapters, which increases the misalignment angle and allows smooth bump and droop travel without ball joint bind. The rod ends adjust on the vehicle by loosening the pinch bolts, adjusting and retightening them, without removing the arms. An O-ring sealed cover cap keeps dirt and weather off the uniball and protects the PTFE liner. The arms are intended to be used with 2.5 extended travel coil-over shocks.
Key features
- 6061 billet aluminum, precision CNC machined
- 1-inch PTFE-lined stainless uniballs
- 17-4 high-grade stainless steel uniball adapter pin
- Adjustable on the vehicle for wheel alignment
- O-ring sealed uniball cover cap
- PTFE-lined 3/4-inch rod ends
- Made in the USA
- Front upper position, direct fit.
Upper arm geometry and wear
An upper control arm sets the top of the wheel’s travel and works with the lower arm to control camber and caster. When the stock joints wear or bind, the arm’s geometry can change under load and the wheel may not track as the suspension moves. Replacing the arm with a uniball design changes how the joint carries that load, so the alignment should be checked after the install.
Aluminum arms resist corrosion better than many steel stampings, but they still need inspection. Look over the bushings, welds and uniball caps for cracks, leaks or movement, and keep the cover cap sealed against grit. PTFE liners wear over time, so check the play in the uniball regularly and replace the liner or joint when play builds.
- Check uniball play after every few trail trips
- Inspect the cover cap seal for dirt intrusion
- Recheck alignment after any adjustment
- Keep track of pinch bolt torque
Specifications
| Brand | Icon Suspension |
|---|---|
| Part number | 58551 |
| UPC | 70000677113 |
| Product type | Upper control arm kit |
| Position | Front upper |
| Material | 6061 billet aluminum |
| Uniballs | 1-inch PTFE-lined stainless |
| Adapter pin | 17-4 stainless steel |
| Rod ends | PTFE-lined 3/4-inch |
| Adjustment | On the vehicle, by loosening the pinch bolts |
| Origin | Made in the USA |
| Fit type | Direct fit |
Vehicle fitment
The kit is for the 07+ Toyota FJ Cruiser platform. Verify the exact model years and trim for your vehicle before buying.
Only the front upper position is listed. Lower arms and other models are not covered. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Suspension work affects steering, braking and handling, so have it done by a professional installer if you are unsure. Support the vehicle on jack stands rated for its weight, never on a jack alone. Tighten fasteners to the torque values in the installation instructions and use the hardware they call for. Re-check all fasteners after the first few miles of driving. Have the alignment checked after any suspension work, and confirm brake line, cable and driveshaft clearance through the full range of travel. Check local regulations on vehicle height and lift limits.
What’s included
The kit includes an upper control arm set with uniballs, taper pin adapters and a sealed cover cap. Check the parts against your installation before starting.
