Overview
The Icon Suspension 21031 is a set of front lower control arms for the 2007-2018 Jeep Wrangler JK, built with CNC notched and bent tubing that is fixture welded for precise fitment during installation.
The arms use dual-rate bushings at both ends, which Icon says isolate vibration, control suspension deflection, increase responsiveness and maximize articulation.
Key features
- CNC notched and bent construction
- Fixture welded for precise fitment during installation
- Dual-rate bushings at both ends
- Isolates vibration and controls suspension deflection
- Maximizes articulation
- Front lower position
Before you install
Front lower control arms carry the load between the axle and the frame, so their condition shapes how the front end steers and tracks. Worn or sagging arms often show up as vibration or a wandering feel on the highway, along with uneven tire wear on the inner edges. Look over the arm bodies, welds and bushings for cracks, splits or play before choosing a replacement.
Arms that change suspension geometry are usually paired with a wheel alignment and a driveline check. Because the arm pivots at the frame and axle, a new arm can shift caster and pinion angle slightly. Plan extra time for those checks, and recheck the bolt torque after the first few drives so the new setup settles correctly.
- Inspect the old arms for bent tubes and cracked welds
- Check bushings for splits before reusing hardware
- Schedule an alignment after the arms are installed
Specifications
| Brand | Icon Suspension |
|---|---|
| Part number | 21031 |
| UPC | 70000682047 |
| Position | Front lower |
| Bushings | Dual-rate at both ends |
| Construction | CNC notched, bent and fixture welded |
| Application | Jeep JK |
Vehicle fitment
The arms are built for the 2007-2018 Jeep Wrangler JK.
Other Wrangler generations such as the TJ, LJ and JL are not covered. Confirm fit for your vehicle’s year, model and trim before ordering.
Installation notes
Control arm replacement changes suspension geometry, so a wheel alignment and driveline angle check are typically needed after installation. Work with the vehicle raised and supported securely on stands.
What’s included
Check the package contents against your installation before starting.


