Overview
The Icon Suspension 57810P is a rear 2.5 VS reservoir shock, sold as a pair, for the 2003 to 2017 Toyota 4Runner and the 2007 to 2014 Toyota FJ Cruiser. It is built for a 0 to 3 inch lift range and uses direct fit mounting at the rear.
The shock is built around a 6061 billet aluminum manifold a few inches below the top cap. That manifold forms the internal Bump Zone, which adds about 20% damping as the shock compresses at high velocity. An externally adjustable CDC valve controls oil flow into the reservoir and offers 10 levels of compression damping.
Key features
- Remote reservoir shock built around a 6061 billet aluminum manifold.
- Bump Zone that adds about 20% damping to help prevent harsh bottom outs.
- CDC valve with 10 levels of compression damping.
- Rebuildable and revalveable construction.
- Gas charged body.
- Polyurethane bushings and forged steel mounting stems.
Reservoir shocks on trail use
Reservoir shocks are often chosen for trail work because the oil can spread heat across a separate reservoir instead of staying in the body. On loose ground the shock sees repeated compression, and a steady damping rate helps the tires stay in contact. The shock also needs room for the reservoir to move with the suspension, so clearance is worth checking early.
Long descents and repeated hard hits can push the bump zone into action, so the mounts and hardware see more load than on paved roads. Adjust the CDC valve in small steps, then check the reservoir and hoses after each trip. Inspect the bushings and stems for wear whenever the rear is serviced.
- Confirm reservoir clearance before trail use
- Adjust CDC settings in small steps
- Check hoses and clamps after each trip
- Inspect bushings and stems at rear service
Specifications
| Brand | Icon Suspension |
|---|---|
| Part number | 57810P |
| UPC | 70000750454 |
| Shock series | 2.5 |
| Position | Rear |
| Quantity | Sold as a pair |
| Lift range | 0 to 3 inch |
| Charge | Gas charged |
| Included hardware | All required hardware |
| Compression adjustment | 10 levels (CDC valve) |
| Fitment type | Direct fit |
Vehicle fitment
The manufacturer fitment list covers the 2003–2017 Toyota 4Runner in the Limited, SR5, Sport, TRD Off-Road, TRD Pro and Trail trims, and the 2007–2014 FJ Cruiser in the Base, TRD Special Edition and Trail Teams Special Edition trims.
Base and other 4Runner trims are not on this list, and the 4Runner years before 2003 are not covered. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Both rear shocks come as a pair, so replace them together to keep the rear damping balanced. Check your rear lift against the 0 to 3 inch range before installation. Work with the vehicle supported on stands and confirm the hardware in the box matches your rear axle before you begin.
What’s included
A pair of rear shocks with all required hardware.



