Overview
The Icon Suspension 58745 is a front extended travel remote reservoir shock kit that provides 0 to 3 inch of adjustable ride height for the Toyota 4Runner and FJ Cruiser. It is an extended coilover conversion built around a race style shock, designed to increase suspension travel and the capability of the front suspension.
The kit comes with front coilovers, sway bar relocation brackets and the hardware needed for installation. The relocation brackets move the sway bar to clear the larger shock. The design took a year to develop, and the coilovers are meant to be paired with an aftermarket uniball upper control arm kit to keep wheel travel correct and reduce premature ball joint wear.
Key features
- Extended travel coilover conversion with a race style shock
- Remote reservoir design for heat dissipation
- Adjustable ride height from 0 to 3 inch
- Sway bar relocation brackets clear the larger shock
- Complete hardware package for installation
- Designed as a front suspension upgrade
Front setup and driveline checks
A front extended travel kit alters suspension geometry in a few places at once, so it helps to think of it as a system. Sway bar relocation brackets clear the larger shock, the upper arm setup controls wheel travel, and the remote reservoir needs room to move. Checking each part together prevents rubbing and uneven wear.
Ride height changes can also affect the driveline and steering. Look for vibration at speed, unusual noise from the axles and any tire rubbing during turns. Keep the bracket and mount bolts checked after the first few drives, since new brackets can settle as the parts seat.
- Check sway bar bracket bolts after the first drives
- Watch for tire rubbing on turns and full compression
- Inspect the reservoir hose for chafing
Specifications
| Brand | Icon Suspension |
|---|---|
| Part number | 58745 |
| UPC | 70000593241 |
| Shock series | Coilover Reservoir |
| Position | Front |
| Ride height adjustment | 0 to 3 inch |
| Shock type | Gas charged |
| Recommended tire size | 285/75R16 |
| Recommended wheel | 16X8 with 5 inch back spacing |
| Included | Front coilovers, sway bar relocation brackets, all required hardware |
Vehicle fitment
The manufacturer fitment list covers the 2003 to 2009 Toyota 4Runner (Limited, SR5, Sport) and the 2007 to 2014 Toyota FJ Cruiser (Base, TRD Special Edition, Trail Teams Special Edition).
The list does not cover newer 4Runner models or later FJ Cruiser years. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Icon recommends installing the coilovers with an aftermarket uniball upper control arm kit, which is not included, to get the proper wheel travel and prevent premature ball joint wear. Because the front ride height changes, have the alignment and driveline angles checked after installation.
What’s included
Front coilovers, sway bar relocation brackets and all the hardware needed to complete the installation.
Not included: The aftermarket uniball upper control arm kit that Icon recommends.

