Overview
The Icon Suspension V.S. 2.0 Series Remote Reservoir Rear Shock, part number 26520R, is a gas charged rear shock for 2007 to 2017 Jeep Wrangler JK models set up with a 2 to 3 inch rear lift. It is the remote reservoir version of Icon’s 26520 shock, with the reservoir mounted apart from the shock body.
The remote reservoir helps dissipate heat, which supports long lasting performance. The shock is specifically valved for the Jeep JK. It is 100% rebuildable and 100% revalveable and sold as a single unit.
Key features
- Remote reservoir design, which Icon says helps dissipate heat
- Nitrogen charged monotube body
- Premium grade 5WT shock oil
- 5/8 inch chrome plated steel shaft
- 6061 aluminum rod end and 6063 anodized aluminum body
- Polyurethane bushings with zinc plated sleeves
- 100% rebuildable and 100% revalveable
Remote reservoir care
A remote reservoir separates the gas and oil storage from the shock body, which gives the body more room to shed heat during long climbs or sustained rough roads. Heat is one of the main causes of damping fade, so keeping the reservoir cool and clear of exhaust parts supports steady performance. Give the reservoir a mounting spot that stays away from the exhaust, the transmission and the tire path.
The hose between the reservoir and the body needs a gentle route. Sharp bends or rubbing against the frame can pinch the line and wear the fitting over time. Check the hose clamps and fittings after the first few drives, and again whenever the rear suspension is serviced.
Shock oil should be inspected when the rear suspension is checked. Look for a damp film on the shaft, a leaking fitting or oil around the reservoir cap. Because the unit can be rebuilt and revalved, service can restore the damping instead of replacing the shock outright.
- Keep the reservoir clear of exhaust and heat sources
- Route the hose with smooth, gentle curves
- Check fittings and clamps after the first drives
Specifications
| Brand | Icon Suspension |
|---|---|
| Part number | 26520R |
| UPC | 70000685474 |
| Shock series | 2.0 Shock Series |
| Position | Rear |
| Lift height | 2 to 3 inch |
| Charge type | Gas charged |
| Reservoir | Remote |
| Shaft | 5/8 inch chrome plated steel |
| Rod end | 6061 aluminum |
| Body | 6063 anodized aluminum |
| Shock oil | Premium grade 5WT |
| Bushings | Polyurethane with zinc plated sleeves |
| Sold as | Single shock |
| Made in | U.S.A. |
Vehicle fitment
It fits the 2007 to 2017 Jeep Wrangler (JK) in the 70th Anniversary, 75th Anniversary, Rubicon, Sahara, Sport, Sport S and X trims, and in the Unlimited versions of those trims.
Wrangler TJ, LJ and JL models are not on this list, and neither are other Jeep generations. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Measure your lift height first, since this shock is made for a 2 to 3 inch rear lift. The remote reservoir sits apart from the shock body, so plan a mounting spot with clearance from heat sources and moving parts, and route the reservoir hose without sharp bends. Support the vehicle securely before working on the rear suspension.
What’s included
Sold individually. Check the package contents, including mounting hardware and reservoir hose, against your installation before starting.
Not included: a second rear shock or any shock for the opposite side.


