Overview
The Icon Suspension 1-3 Inch Rear 2.0 Aluminum Shock Kit, part 56505, is a rear shock kit for a 1 to 3 inch lift. It uses the Vehicle Specific 2.0 Aluminum Series design with monotube, gas-charged shocks and all required hardware.
The 2.0 Aluminum Series suits everyday street driving and weekend off-road use. The shocks can be rebuilt and revalved, and Icon’s V.S. 2.5 Series is the choice for harder off-road use.
Key features
- Vehicle Specific 2.0 Aluminum Series design
- Monotube, gas-charged shock body
- 100% rebuildable and revalveable.
- Designed for street and weekend off-road use
Alignment after a lift
A lift changes the rear axle angle and driveline geometry, which can cause vibration if the angles run too steep. Measuring the pinion and driveshaft angles before and after the lift helps show whether a spacer, a crossmember change or a driveshaft correction is needed. Monotube shocks handle heat well, so the angle work often has a bigger effect on ride quality.
Rebuildable shocks are easier to live with over time because seals and valving can be serviced without replacing the whole shock. Keep a service log of rebuilds and fluid changes. Check the rear bushings and mounts after the first few weeks of street driving, since a new lift can shift the load path.
- Measure driveline angles after the lift
- Check rear alignment after installation
- Inspect mounts and bushings during service
Specifications
| Brand | Icon Suspension |
|---|---|
| Part number | 56505 |
| UPC | 85347575107 |
| Position | Rear |
| Lift range | 1 to 3 in |
| Shock series | 2.0 Aluminum |
| Shock type | Monotube, gas charged |
| Rebuildable | 100% |
| Revalveable | 100% |
Installation notes
Lift kits change alignment and driveline angles, so check the rear driveline angle and get the vehicle aligned after the 1 to 3 inch lift is installed. These shocks can be rebuilt and revalved.
What’s included
The kit includes all required hardware.
Vehicle fitment
This kit is Vehicle Specific, so confirm fit for your year, make, model and trim before ordering. Check the lift height against your suspension.
Rear kits are sized by vehicle, so the 1 to 3 inch lift range is a guide, not a fit guarantee. Confirm your vehicle’s year, model and trim before ordering.



