Overview
The Icon Suspension 2.5 VS CDCV reservoir shock, part number 57810CP, is a gas charged reservoir shock absorber for a 0-3 in. lift range, sold as a pair with all required hardware. ICON Vehicle Specific (V.S.) 2.5 Series shocks are built for outstanding off-road performance and a smooth ride on the street, and each one is configured for its application in both length and damping tune.
Like all ICON shock absorbers, V.S. 2.5 Series shocks are 100% rebuildable and 100% revalveable. For piggyback and specific remote reservoir applications, ICON’s 6061 billet aluminum manifold sits a few inches below the top cap and creates an internal Bump Zone that adds an additional 20% of damping force. That extra force helps prevent harsh bottom outs and controls the suspension when it compresses at high velocity. The CDC valve is externally adjustable and restricts oil flow into the reservoir, giving 10 levels of compression damping force ranges.
Key features
- Vehicle Specific 2.5 Series design, configured for each application in length and damping tune
- Internal Bump Zone from a 6061 billet aluminum manifold adds an additional 20% of damping force in remote reservoir applications
- Externally adjustable CDC valve with 10 levels of compression damping force ranges
- 100% rebuildable and 100% revalveable
- Hydraulic and gas charged construction
- Sold as a pair with all required hardware
Setting up remote reservoir damping
Remote reservoir shocks separate gas and oil storage from the damper body, which gives the oil more room to cool under repeated hard compression. The reservoir hose needs a planned route. Keep it clear of tires, exhaust, brake lines and steering linkage, and allow slack for full compression and extension.
External compression adjustment is most useful when the truck carries different loads or runs different terrain. Adjust one setting at a time and note each change so you can return to a known baseline. Valving changes affect the whole corner, so make matching adjustments on both sides of an axle to keep the truck balanced.
- Check reservoir clearance before final tightening
- Inspect hose fittings and the body for seepage
- Note the valve setting before each adjustment
Specifications
| Brand | Icon Suspension |
|---|---|
| Part number | 57810CP |
| UPC | 70000750531 |
| Series | ICON Vehicle Specific 2.5 Series, reservoir shock |
| Lift range | 0-3 in. |
| Shock type | Hydraulic / gas charged |
| Reservoir | Remote reservoir with CDC valve |
| Compression damping | 10 levels, externally adjustable |
| Quantity | Sold as a pair |
| Hardware | All required hardware included |
Vehicle fitment
Fit depends on your year, make, model and trim, so confirm it before ordering. Check that your current suspension height falls within the 0-3 in. lift range.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Each shock is matched to its application in length and damping, so do not swap it for a different length or valve setting without checking fitment first. The hardware needed for mounting is supplied with the pair.
What’s included
A pair of 2.5 VS CDCV reservoir shocks with all required hardware.

