Overview
The Icon Suspension 77701P is a rear V.S. 2.5 Series shock absorber for 01-Current GM 2500 and 3500 HD trucks with up to 1 inch of lift. ICON builds each Vehicle Specific shock in a set length and damping tune, aimed at strong off-road control with a smooth ride on the street.
The shock is a nitrogen charged monotube design with a piggyback remote reservoir. The reservoir is meant to improve heat dissipation, which helps reduce shock fade during prolonged use. An internal Bump Zone and an externally adjustable CDC valve give more ways to control the suspension as it compresses.
Because the shock is 100% rebuildable and 100% revalveable, it can be serviced and retuned for a different driving style rather than replaced. Each shock is configured for its application in both length and damping tune, so the rear shocks are matched to the application rather than a generic fit.
Key features
- Bump Zone adds 20% more damping as the shock approaches full compression, helping prevent harsh bottom outs.
- Externally adjustable CDC valve restricts oil flow into the reservoir and creates 10 levels of compression damping force ranges.
- Remote reservoir design improves heat dissipation to reduce shock fade during prolonged use.
- Premium grade 5WT shock oil for consistent damping along a wide temperature range.
- 7/8 inch diameter induction hardened, chrome plated shock shaft.
- PTFE lined spherical bearings and application specific mounting hardware.
- 100% rebuildable and 100% revalveable.
Choosing a remote reservoir shock
A remote reservoir separates oil and gas storage from the shock body, which gives the damper more capacity for long descents and repeated hard use. The reservoir hose needs a clear path to the frame or crossmember, so check its routing against steering and axle travel. Mounting space on heavy trucks is often tighter than on lighter ones, so measure before ordering.
Rebuildable shocks can be serviced with new seals and shaft parts, and revalving changes the valve stack to suit a new load or terrain. Keep the bump stops, bushings and mounting hardware in good condition, since they carry loads the shock does not. A rear shock that feels soft over bumps or leaks at the shaft seal is usually due for service.
- Check the reservoir hose for chafing
- Inspect the shaft seal for oil weeping
- Look for worn eyelet bushings
- Confirm the hose clears the frame at full droop
Specifications
| Brand | Icon Suspension |
|---|---|
| Part number | 77701P |
| UPC | 70000750470 |
| Position | Rear |
| Product line | ICON Vehicle Specific (V.S.) 2.5 Series |
| Body design | Nitrogen charged monotube with piggyback reservoir |
| Reservoir | Remote |
| Shock oil | Premium grade 5WT |
| Shaft | 7/8 inch diameter, induction hardened, chrome plated |
| Bearings | PTFE lined spherical |
| Compression adjustment | Externally adjustable CDC valve, 10 levels of compression damping force ranges |
| Bump Zone damping | 20% increase |
| Lift compatibility | Up to 1 inch of lift |
| Rebuildable | 100% |
| Revalveable | 100% |
| Supplied | As a set, with application specific mounting hardware |
Vehicle fitment
It fits 01-Current GM 2500 and 3500 HD trucks with up to 1 inch of lift. Confirm the exact model, year and trim for your truck before choosing this shock.
Lighter duty GM trucks and vehicles with more than 1 inch of lift fall outside this fit range. Confirm your vehicle’s year, model and trim before ordering.
What’s included
The set comes with application specific mounting hardware. Check the package contents against your installation before starting.

