Overview
The Icon Suspension 58645 is a 3.5 inch extended travel front coilover shock kit for the 2003–2009 Toyota 4Runner (Limited, SR5, Sport) and the 2007–2009 Toyota FJ Cruiser (Base, TRD Special Edition, Trail Teams Special Edition). The coilovers are gas charged and come with all required hardware, and they have an adjustable range of 0 to 3.5 inch.
Extended travel lets the front suspension move farther, which is the purpose of this kit. The coilovers are meant to be installed with an aftermarket uniball upper control arm kit, which keeps wheel travel correct and helps prevent early ball joint wear. The recommended setup is 285/75R16 tires with 16X8 wheels and 5 inch back spacing.
Key features
- Extended travel design with an adjustable range of 0 to 3.5 inch.
- Gas charged coilovers.
- Front coilovers included.
- All required hardware included.
- Designed to be installed with an aftermarket uniball upper control arm kit.
Setting up extended travel
Extended travel raises the amount of wheel movement the suspension can use, which only works well when the rest of the front end is set up to match. Upper control arms, sway bar links and brake lines all see more movement, so check their clearance once the kit is on. The upper arm kit helps keep the geometry where the coilovers expect it, which is why the two parts are usually bought together.
After installation, have the alignment checked, since longer travel changes caster and camber as the wheels move. Look for rubbing at full compression and for clicking from the ball joints, and recheck the hardware after the first few trail runs. Keep the coil springs clean and inspect them for corrosion when the truck is serviced.
- Check brake line length at full droop
- Inspect ball joints for play
- Recheck hardware after the first trail runs
Specifications
| Brand | Icon Suspension |
|---|---|
| Part number | 58645 |
| UPC | 70000440288 |
| Kit size | 3.5 inch extended travel coilover shock kit |
| Position | Front |
| Travel range | 0 to 3.5 inch |
| Charge | Gas charged |
| Included | Front coilovers and all required hardware |
| Recommended tire | 285/75R16 |
| Recommended wheel | 16X8 with 5 inch back spacing |
| Fitment type | Direct fit |
Vehicle fitment
The manufacturer fitment list covers the 2003–2009 Toyota 4Runner in Limited, SR5 and Sport trims, and the 2007–2009 Toyota FJ Cruiser in Base, TRD Special Edition and Trail Teams Special Edition trims.
Newer FJ Cruiser model years are not on this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Plan for the uniball upper control arm kit before installation, since the coilovers are meant to be installed with it. Support the vehicle securely and handle the coil springs carefully while they are under load.
What’s included
Front coilovers and all required hardware.
Not included: the aftermarket uniball upper control arm kit that the coilovers are meant to be installed with.


