Overview
The Icon Suspension 58647 is a front extended travel coilover shock kit with a 0 to 3.5 inch lift range, described by the manufacturer for the FJ Cruiser. The kit uses adjustable gas-charged coil-over shocks to increase front suspension travel.
These coil-overs are meant to be installed with an aftermarket uniball upper control arm kit, which helps keep the intended wheel travel and limits premature ball joint wear. Recommended sizes are 285/75R16 tires on 16×8 wheels with 5 inches of back spacing.
Key features
- Extended travel design to increase front suspension travel
- 0 to 3.5 inch lift range
- Adjustable coil-over shock design
- Gas-charged shock body
- 3.5 series shock with bypass reservoir
- Includes front coilovers and all required hardware
Upper control arm setup
Coil-over shocks alone do not control the wheel’s path, so the upper control arm geometry matters. A uniball upper arm holds the wheel’s arc more consistently than a rubber-bushed arm, which helps keep the wheel travel where it was designed to be. Worn ball joints under a lifted front end can wear quickly, so check the joints during installation.
Coil-over springs store a lot of energy. Use spring compressors rated for the job and keep the vehicle supported while you work. After the kit is in, check brake lines, sway bar links and steering for clearance at full travel, and recheck the bolts after the first drives.
- Verify uniball arm clearance at full travel
- Tighten fasteners after the first drive
- Check steering stops and bump stops
Specifications
| Brand | Icon Suspension |
|---|---|
| Part number | 58647 |
| UPC | 70000558864 |
| Lift range | 0 to 3.5 in. |
| Shock type | Coil-over |
| Shock series | 3.5 |
| Reservoir | Bypass |
| Hydraulic / gas charged | Gas charged |
| Recommended tire size | 285/75R16 |
| Recommended wheel | 16×8 with 5 in. back spacing |
Vehicle fitment
This kit is for FJ Cruiser front suspension. Model years are not established here, so confirm fit for your model year and configuration before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The coil-overs are meant to be installed with an aftermarket uniball upper control arm kit, which must be sourced separately. Coil-over springs store significant energy, so use proper spring compression tools and support the vehicle securely during installation.
What’s included
Front coilover shocks and all required hardware for the front suspension kit.
Not included: The aftermarket uniball upper control arm kit that Icon recommends for use with these coil-overs.

