Overview
The Icon Suspension 77727P is a V.S. 2.5 Series shock sold as a set for 2001-2017 Chevrolet Silverado and GMC Sierra 2500 and 3500 trucks with 0-2.5 inch of lift. Confirm whether your corner needs the front or rear position before installing.
ICON builds each V.S. shock to its application in both length and damping tune. The nitrogen charged monotube body and piggyback reservoir work with a 6061 billet aluminum manifold that forms the Bump Zone, which adds 20% damping force near full compression. The shaft is 7/8 in diameter, induction hardened and chrome plated. A more user defined tune is available through the Compression Damping Control Valve (CDCV) or the OMEGA Series bypass shocks.
Key features
- Bump Zone adds 20% damping force near full compression to help prevent harsh bottom outs.
- Remote reservoir design aids heat dissipation and reduces shock fade during prolonged use.
- Premium grade 5WT shock oil for consistent damping over a wide temperature range.
- Externally adjustable CDC valve creating 10 levels of compression damping force ranges.
- PTFE lined spherical bearings and application specific mounting hardware.
- Rebuildable and revalveable.
Matching a set of shocks
Shocks that work as a set need to match in damping and mounting length, so replacing only one side can leave the truck pulling or bouncing unevenly. Before ordering, measure ride height on both sides and note any leaning under load. Mixed wear between old and new shocks often shows up first on rough pavement as a rocking or rolling feel.
The compression valve and damping tune in a V.S. style shock can be changed over time. Settings suited to towing differ from those for trail running, so write down the knob position before any change. Keep the reservoir and hose free of debris, and check the mount bushings during each service.
- Measure ride height on both sides before removing old shocks
- Mark the CDC valve setting before adjusting
- Inspect the reservoir hose for wear
- Replace worn eyelet bushings at the same time
Specifications
| Brand | Icon Suspension |
|---|---|
| Part number | 77727P |
| UPC | 70000750473 |
| Series | ICON Vehicle Specific (V.S.) 2.5 Series |
| Quantity | Sold as a set |
| Body | Monotube, nitrogen charged, piggyback reservoir |
| Shock oil | Premium grade 5WT |
| Shaft | 7/8 in diameter, induction hardened, chrome plated |
| Bearings | PTFE lined spherical bearings |
| Compression adjustment | Externally adjustable CDC valve, 10 levels |
| Bump Zone damping increase | 20% |
Vehicle fitment
Covers these Chevrolet Silverado models: 2001-2004 2500 (Base, LS, LT, WT), 2001-2017 2500 HD (Base, High Country, LS, LT, LTZ, WT), 2001-2006 3500 (Base, LS, LT, WT) and 2007-2017 3500 HD (High Country, LT, LTZ, WT). The matching GMC Sierra 2500, 2500 HD, 3500 and 3500 HD models are covered as well. Silverado and Sierra 1500 models fall outside the range, and 2018 and later model years are not included.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The shocks come as one set, so replace the pair together to keep damping matched. Because the position is listed both ways, confirm which corner each shock mounts to before installation. Application specific mounting hardware is included in the set.
What’s included
Application specific mounting hardware is included in the set. Confirm the shock count against the package before installing.

