Overview
The Icon Suspension 57721 is a 2.5 inch piggyback rear shock from the Icon V.S. 2.5 Series, supplied as a single shock with all required hardware. It fits the 2007–2015 Toyota Tundra and is extended in length for use on 6 to 7 inch sub-frame lift kits.
Icon valves these piggyback manifold shocks specifically for the Tundra, with tuning aimed at better performance than its standard 2.0 monotube shocks. The gas charged piggyback reservoir is the main design feature, aimed at improving performance and ride quality at the rear.
Key features
- 2.5 inch diameter piggyback manifold body.
- Valved specifically for the Tundra.
- Extended length for 6 to 7 inch sub-frame kits.
- Gas charged construction.
- All required hardware included.
Sub-frame lift considerations
A sub-frame lift changes the geometry at the rear axle, so shock length has to match the lift height. An extended piggyback shock is built for that gap, and the gas charged reservoir keeps the body stable over repeated compression. Before you buy, measure the mount-to-mount distance on your truck and compare it with the shock’s extended length.
Check the mounting stems, eyes and bushings during installation, and tighten all hardware after the first few drives. Leaks around the reservoir hose or fittings are an early sign of wear, and a soft or bouncy rear end often means the shock is worn. If you change the lift later, recheck the shock length first, because a mismatch can strain the upper mount.
- Measure mount-to-mount distance before ordering
- Inspect the reservoir hose for chafing
- Recheck hardware after the first drives
Specifications
| Brand | Icon Suspension |
|---|---|
| Part number | 57721 |
| UPC | 70000563824 |
| Shock series | 2.5 Aluminum Series, piggyback reservoir |
| Diameter | 2.5 inch |
| Charge | Gas charged |
| Length | Extended length for 6 to 7 inch sub-frame kits |
| Sold | Individually |
Vehicle fitment
It fits the 2007–2015 Toyota Tundra in the 1794 Edition, Base, Limited, Platinum, SR, SR5 and TRD Pro trims. Coverage is confirmed for 2007 through 2015 Tundra models only, so confirm fit for your vehicle’s year, model and trim before ordering.
The listed years do not cover other Toyota trucks or SUVs. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The extended length is designed for 6 to 7 inch sub-frame kits, so confirm your lift setup matches that range before installation. Because it is sold individually, check whether your rear axle needs one or two shocks before ordering. Support the vehicle securely on stands during work.
What’s included
One shock with all required hardware, sold individually. Check the box contents against your mounting plan before installation.

