Overview
The Icon Suspension 67710P is a front V.S. 2.5 Series piggyback shock kit for Ford F-250 and F-350 Super Duty trucks from 2005 to 2017. It is sold as a pair with all required hardware and is a gas charged front shock.
The V.S. 2.5 Series is configured for each application in both length and damping tune and can be rebuilt and revalved. A 6061 billet aluminum manifold a few inches below the top cap forms an internal Bump Zone that adds 20% more damping force, helping control high-velocity compression.
Key features
- Piggyback reservoir design
- Bump Zone manifold that Icon says adds 20% damping force
- Configured per application in length and damping tune
- 100% rebuildable and revalveable
- Gas charged
- Two front shocks in each pair
Installing the reservoir
Front piggyback shocks sit in a tight space between the tire, the fender liner and the steering linkage. Before bolting anything in, rotate the wheel through full lock and full compression to see where the reservoir body and hose travel. A small change in mounting angle can keep the hose away from the tire sidewall on a lifted truck.
Front dampers carry much of the braking load and steering input, so their condition affects how the truck tracks on washboard roads. Pairing new shocks with fresh bushings and a check of the upper mounts often gives a more consistent feel. Note the hose clamp positions so the routing stays the same at the next service.
- Test steering lock with the reservoir installed
- Check fender liner clearance at full compression
- Inspect upper mounts for play before fitting
Specifications
| Brand | Icon Suspension |
|---|---|
| Part number | 67710P |
| UPC | 70000750460 |
| Shock series | 2.5 Piggyback Reservoir |
| Position | Front |
| Manifold | 6061 billet aluminum |
| Damping | Bump Zone adds 20% additional damping force |
| Charging | Gas charged |
| Quantity | Sold as a pair |
Vehicle fitment
Fits 2005–2017 Ford F-250 Super Duty and F-350 Super Duty in the Cabela’s, FX4, Harley-Davidson Edition, King Ranch, Lariat, Platinum, XL and XLT trims.
Super Duty model years before 2005 or after 2017 are not on the list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The piggyback reservoir needs clearance and a hose route away from the tire and steering components. Icon describes all required hardware as included, so install with the supplied parts, then have front alignment checked.
What’s included
A pair of front piggyback shocks and the required hardware.


