Overview
The Icon Suspension Standard Travel Front Coilover Shock Kit, part 81000, is a front coilover kit for the Nissan Titan. Its ride height adjusts from 0 to 3 inches, and it comes preset with 2 inch of lift, which Icon says levels the truck and gives clearance for 33 inch tall tires.
Coverage is 2004 to 2015 Nissan Titan in the LE, PRO-4X, S, SE, SL, SV and XE trims. The Nissan Armada is not covered by this kit.
Key features
- Adjustable ride height from 0 to 3 inches
- Race shock piston with flutter stack compression valving
- Billet aluminum upper mount with a 5/8 inch PTFE-lined spherical bearing
- Chrome-silicon spring
- Completely rebuildable and revalvable shock
- Nitro-steel shaft that Icon says will not chip or rust like chrome shafts
Ride height and clearance
A coilover combines the shock and spring into one unit, so ride height and damping can be set together. Adjusting the preload changes the height at the front axle, and each change shifts the steering geometry a little. Ride height affects clearance at the fenders, the steering stops and the lower control arm, so check those points after any change.
Tire size matters as much as lift. Larger tires raise the effective rolling diameter and can rub at full compression, especially when the steering is turned. Plan the ride height around the tires you will actually run, and leave room for the wheel to move through its travel without contacting the body or brake lines.
Coilover shocks need periodic care. Clean the shaft and seals after off-road runs, look for oil film near the reservoir or body, and check the upper mount for play. A rebuildable, revalvable shock can be serviced instead of replaced, which keeps the damping tuned as the truck’s use changes.
- Check fender and steering clearance after each height change
- Match tire size to the chosen ride height
- Clean shafts and seals after off-road use
Specifications
| Brand | Icon Suspension |
|---|---|
| Part number | 81000 |
| UPC | 70000413217 |
| Position | Front |
| Ride height adjustment | 0-3 inches |
| Preset lift | 2 inch |
| Shock diameter | 2.5 inch |
| Body | CAD plated threaded body, optional Extreme Weather Plating |
| Upper mount | Billet aluminum |
| Spring | Chrome-silicon |
| Reservoir | 250 PSI nitrogen charged, internal |
| Shaft | Nitro-steel |
| Recommended tire | 305/70R17 |
| Recommended wheel | 17X8 with 5 1/4 inch back spacing |
| Origin | Made in the USA |
Vehicle fitment
Fits 2004 to 2015 Nissan Titan (LE, PRO-4X, S, SE, SL, SV, XE).
Not covered: the Titan model years from 2016 onward and the Titan XD, which is a separate model. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The kit comes preset with 2 inch of lift, and the ride height adjusts from 0 to 3 inches. A coilover kit changes ride height, so check clearance with the tires you plan to run.
What’s included
The coilover shocks with their chrome-silicon spring and billet aluminum upper mount.
Not included: Extreme Weather Plating is an optional finish and is not included.




