Overview
The G2 Axle and Gear 2-2015-273 is a ring and pinion for a GM 7.5 inch axle. It is a 3.73 ratio, a middle-range setting: the pinion turns 3.73 times for each ring gear revolution, giving solid low-speed pulling.
The part number ends in 273, so confirm the exact ratio with G2 before ordering, since the gear mesh and carrier setup depend on it. The 7.5 inch ring gear size is specific, so the axle on your vehicle decides the match.
Key features
- GM 7.5 inch axle size
- 3.73 ratio
- Part number and ratio should be confirmed before ordering
Ring and pinion wear signs
Ring and pinion gears wear slowly under normal driving, but they show clear signs when something is off. A whine that rises and falls with road speed often points to the gear mesh, while a clunk on acceleration or deceleration can mean backlash is wrong or the pinion bearing is loose. Metal particles in the differential fluid are a sign to stop driving and have the axle inspected.
Before replacing the set, check the carrier bearings, pinion seal and fluid. A damaged bearing can wear out a new gear set quickly, so replacing worn carrier parts at the same time is common practice.
- Inspect the carrier bearings
- Check the pinion seal for leaks
Specifications
| Brand | G2 Axle and Gear |
|---|---|
| Part number | 2-2015-273 |
| UPC | 631410105568 |
| Axle type | GM 7.5 inch |
| Gear ratio | 3.73 (per title) |
Vehicle fitment
Measure the ring gear on your GM axle and confirm the ratio before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
A ring and pinion swap needs correct backlash and tooth contact, which is usually handled by a gear shop. Plan a break-in period afterward.
What’s included
One ring and pinion set for a GM 7.5 inch axle, part number 2-2015-273.
Not included: Check the carrier bearings and shims against your installation before starting.









