Overview
The G2 Axle and Gear 2-2080-488 is a ring and pinion for the rear Dana 80 axle. The product name gives a 4.88 ratio, while the attribute list reads 4.86. Confirm the exact ratio with G2 or on the box before ordering, since a difference in ratio changes the gear mesh and the carrier setup.
G2 describes its Performance Ring and Pinion sets as built for oversized tires and high-performance engines, with current materials and manufacturing. The set is identified by the Dana 80 rear axle, and no vehicles or model years are named. The housing on your vehicle is the first thing to verify.
Key features
- Ring gear and pinion sold as one set for the Dana 80 rear axle
- Ratio shown as 4.88 in the product name and 4.86 in the attributes
- Designed for oversized tires and high-performance engines.
- Designed for oversized tires and high-performance engines, with current materials and methods.
- Rear axle location
Confirm the ratio first
The ratio sets how many times the pinion turns for each ring gear turn, so a small difference changes the gear mesh, the tooth contact and the carrier setup. Ring gears and pinions are cut as a matched pair, so the exact ratio must be right before any gears are ordered. Settle this question with the seller and your installer first.
Once the ratio is settled, plan the rest of the job. Carrier bearings, pinion bearings and seals are commonly renewed with the gears. Gear oil should match the axle’s requirements, and the carrier should be checked for runout and wear before the set is installed.
- Settle the ratio before ordering
- Measure the ring gear diameter
- Plan for new carrier bearings and seals
Specifications
| Brand | G2 Axle and Gear |
|---|---|
| Part number | 2-2080-488 |
| UPC | 631410105285 |
| Axle type | Dana 80 |
| Axle location | Rear |
| Gear ratio | 4.88 (product name); 4.86 (attribute list) |
| Axle manufacturer | Dana |
Vehicle fitment
Verify the rear Dana 80 housing and carrier on your vehicle before ordering. Confirm the exact ratio before buying, since the gear mesh and carrier setup depend on it.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Gear mesh and carrier preload need precise setup, and the ratio question should be settled before the gears are ordered. A gear shop is the practical installer, followed by a break-in period.
What’s included
One ring and pinion set for the rear Dana 80 axle, part number 2-2080-488.
Not included: Carrier bearings and shims are not part of this Dana 80 set. Check the package contents against your installation before starting.
















