Overview
The G2 Axle and Gear 2-2056-456 is a 4.56 ratio ring and pinion for the Toyota Tacoma 8.4 Inch axle. The pinion turns 4.56 times for each ring gear revolution, a numerically high ratio that multiplies torque at the wheels and suits larger tires.
The set is made for the Toyota Tacoma 8.4 Inch axle in both front and rear positions. It is designed for oversized tires and high-performance engines, with current materials and manufacturing methods. Measure the 8.4 inch ring gear and confirm the position on your vehicle before ordering.
Key features
- 4.56 gear ratio for the Toyota Tacoma 8.4 Inch axle
- Front and rear axle locations
- Ring gear and pinion supplied as one set
- Designed for oversized tires and high-performance engines.
- Made with current materials and manufacturing methods.
Gearing for the 8.4 inch Tacoma
A 4.56 set is a numerically high ratio that multiplies torque at the wheels, making it useful for larger tires and heavier pulling. Because the same gear size is made for front and rear positions, the housing and carrier should be checked closely before the old gears are removed. Mismatched parts can look similar but fit differently.
Gear mesh and carrier preload are the two settings that most affect quiet operation and gear life. A gear shop with a dial indicator and preload tools is the usual choice for this type of job. Replacing carrier bearings, pinion seals and the crush sleeve during the rebuild keeps the new gears from running on worn parts.
- Housing position, front or rear
- Ring gear diameter and bolt pattern
- Pinion seal and crush sleeve
- Carrier bearing and shim kit
Specifications
| Brand | G2 Axle and Gear |
|---|---|
| Part number | 2-2056-456 |
| UPC | 631410094664 |
| Axle type | Toyota Tacoma, 8.4 Inch (per title) |
| Axle location | Front or rear |
| Gear ratio | 4.56 |
| Axle manufacturer | Toyota |
Vehicle fitment
It is made for the Toyota Tacoma 8.4 Inch axle. Confirm the axle size, position and carrier on your truck before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Gear mesh and carrier preload on an 8.4 inch set are set with measurement tools, so a gear shop is the practical installer. Break in the new gears before towing.
What’s included
One 4.56 ring and pinion set for the Toyota Tacoma 8.4 Inch axle, part number 2-2056-456.
Not included: Carrier bearings and shims are not part of the 4.56 Tacoma set.
















