Overview
The Fab Fours Rear Fender Flare, part number JK1005-1, is a high arch rear flare made for 4-door models. Its high arch design allows for bigger tires and gives greater tire clearance, and Fab Fours designed it around ease of installation and modularity.
The flare is CNC laser cut and brake formed from 11-gauge steel, with a 2-stage matte black powder coat finish. It bolts directly to the Fab Fours base fender, part J1001, using the stainless steel hardware included with the set. No drilling is required, and the flares are sold as a pair.
Key features
- High arch design for bigger tires
- Greater tire clearance than the factory fender
- 11-gauge steel, CNC laser cut and brake formed
- 2-stage matte black powder coat
- Stainless steel hardware
- No drilling required
- Modular design that bolts to the base fender
Choosing the right rear setup
A rear flare works with the base fender, so the fender system and the flare should be chosen together. Higher arches give more tire room over the rear wheels, but larger tires also add load to the suspension, shocks, and bearings. Look at the tire and wheel combination before ordering so that the flare, rear body, and fuel filler area all stay clear.
After installation, check that the flare does not touch the tires at full compression or steering lock, and that the rear lights and license plate remain visible. Inspect the stainless hardware after rough trail use and check the powder coat for chips that could start rust. Tire rub often shows up as shiny wear on the flare’s inner edge, so look for it early. Pair the flares with a suspension check if larger tires are planned.
- Check tire clearance at full compression
- Confirm taillight and plate visibility
- Inspect hardware after trail use
Specifications
| Brand | Fab Fours |
|---|---|
| Part number | JK1005-1 |
| UPC | 5810113919 |
| Position | Rear |
| Body style | 4-door models |
| Material | 11-gauge steel |
| Finish | 2-stage matte black powder coat |
| Mounting hardware | Stainless steel |
| Weight | 25 lb |
| Height | 18 inches |
| Width | 12 inches |
| Length | 70 inches |
| Quantity | Pair |
| Installation | No drilling required |
Vehicle fitment
The flares fit 4-door models. Check the year and the base fender before ordering.
The rear flare bolts to the base fender, so it must be matched to the base fender system for your vehicle. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
No drilling is needed, and the flare attaches to the base fender with the stainless steel hardware. Check the base fender first, since the flare is built to mount to it.
What’s included
A pair of rear fender flares with stainless steel hardware.




















