Overview
It is an Ultimate Dana 60 rear axle assembly with a 4.10 gear ratio, built for the Jeep Wrangler JK. It is a direct fit for the 2007–2018 Jeep Wrangler (JK) in 2-door and 4-door models, and it is the rear axle version of the Ultimate Dana 60 line.
It is built for off-road use and carries a disc brake upgrade and a factory electric locker. The axle shafts are 35 splines. It is a bolt-in replacement for the JK rear, and the rear gear and locker setup come with the axle.
The rear is built with an 8 on 6.5 inch wheel bolt pattern. Its 4.10 ratio is the numerically lower of the two Ultimate Dana 60 ratios offered for this JK rear, so pair the gearing with your tire size and driving style before choosing it.
Key features
- Ultimate Dana 60 rear housing for the Jeep Wrangler JK
- 4.10 gear ratio
- Factory electric locker
- Disc brake upgrade
- 35 spline axle shafts
- 8 on 6.5 inch wheel bolt pattern
Gearing and tire size
Axle gearing sets how fast the engine turns at a given road speed, and it interacts with tire diameter. Taller tires with a numerically lower ratio can lower engine speed on the highway, while a numerically higher ratio helps low-speed crawling. Plan the ratio around the tires you run and how you drive.
A locker and larger shafts put more load on the drivetrain, so check the gear oil regularly and listen for changes in noise. A change in tire size often affects speedometer accuracy, so recalibrate the speedometer after a change. Inspect the rear seals after deep water or mud.
- Check gear oil level and condition at regular intervals
- Watch for leaks at the cover and axle seals
- Recheck speedometer calibration after tire size changes
Specifications
| Brand | Dana Spicer |
|---|---|
| Part number | D/S10034270 |
| Axle type | Ultimate Dana 60 rear |
| Position | Rear |
| Housing | Jeep JK, Dana 60 (2007 onward) |
| Gear ratio | 4.10 |
| Axle spline | 35 splines |
| Traction device | Factory electric locker |
| Brakes | Disc brake upgrade |
| Wheel bolt pattern | 8 on 6.5 inches |
| Fitment type | Direct fit |
Vehicle fitment
It fits the 2007–2018 Jeep Wrangler (JK), in 2-door and 4-door models. The housing is the JK-specific Dana 60, so it does not interchange with the front axle or with JL-generation rear axles.
Confirm fit for your vehicle’s year, model and trim before ordering, especially for the 2018–2022 Jeep Wrangler (JL), the Gladiator, and the older TJ, LJ and YJ models.
What’s included
The rear axle assembly with the factory electric locker, disc brake upgrade and 35 spline axle shafts.









