Select your vehicle

Dana Spicer Dana 44 AdvanTEK Front Axle Shaft (Passenger Side) – 10044432

Dana Spicer

Shop on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Dana Spicer passenger side front axle shaft for the Dana 44 AdvanTEK
  • Made from SAE-4340 nickel chromoly steel
  • Direct fit for 2018–2026 Jeep Wrangler JL and 2020–2026 Jeep Gladiator
  • Part number D/S10044432, front right position

Description

Overview

The Dana Spicer D/S10044432 is the passenger side front axle shaft for the Dana 44 AdvanTEK front axle. It is a direct fit for the 2018–2026 Jeep Wrangler (JL) and the 2020–2026 Jeep Gladiator, and it sits in the front right position.

The shaft is made from SAE-4340 nickel chromoly steel, which brings added toughness, high-temperature strength and abrasion resistance, along with a steady hardenability. It is built as a driveline component for off-road use, and the driver side shaft (D/S10044422) is a separate part.

Key features

  • Passenger side front axle shaft
  • SAE-4340 nickel chromoly steel
  • Toughness and abrasion resistance from the chromoly steel
  • Built for the Dana 44 AdvanTEK front axle

Front shaft wear and replacement

A front axle shaft transmits torque through the joint at each end, so the boot and grease protect the joints from grit and water. When a boot splits, grease escapes and dirt gets in, which speeds up wear. A worn joint often makes a clicking sound when turning under power, and a vibration at speed can point to a bent shaft or a loose hub.

Before fitting a new shaft, clean the splines and the hub face, and check the seals for nicks. Use new fasteners where the design calls for them, and tighten to the correct torque for your axle. Keep a record of trail use, since off-road driving puts more stress on the driveline than road driving does.

  • Replace a split boot before it lets dirt in
  • Clean the spline faces before reinstalling
  • Check the hub seal for leaks after the first drive

Specifications

Brand Dana Spicer
Part number D/S10044432
Axle type Dana 44 AdvanTEK
Axle location Front
Shaft location Passenger side assembly
Position Front right
Material SAE-4340 nickel chromoly
Fitment type Direct fit

Vehicle fitment

It is a direct fit for the 2018–2026 Jeep Wrangler (JL), in 2-door and Unlimited 4-door models, and for the 2020–2026 Jeep Gladiator.

Coverage ends at the vehicles above. Check your year, model and trim against them before ordering.

What’s included

One passenger side axle shaft. The driver side shaft is a separate part, Dana Spicer D/S10044422.

Fitment

VehicleYearsTrims
Jeep Gladiator2020–202680th Anniversary, Altitude, High Altitude, Launch Edition, Mojave, Overland, Rubicon, Sport, Sport S, Willys, Willys Sport
Jeep Wrangler (JL)2018–202680th Anniversary (2-Door), Freedom (2-Door), Islander (2-Door), Rubicon (2-Door), Sport (2-Door), Sport S (2-Door), Unlimited 80th Anniversary (4-Door), Unlimited Freedom (4-Door), Unlimited High Altitude, Unlimited High Altitude (4-Door), Unlimited High Altitude 4xe, Unlimited High Altitude 4xe (4-Door), Unlimited Islander (4-Door), Unlimited Moab (4-Door), Unlimited Rubicon (4-Door), Unlimited Rubicon 392, Unlimited Rubicon 392 (4-Door), Unlimited Rubicon 4xe, Unlimited Rubicon 4xe (4-Door), Unlimited Sahara (4-Door), Unlimited Sahara 4xe, Unlimited Sahara 4xe (4-Door), Unlimited Sahara Altitude (4-Door), Unlimited Sport (4-Door), Unlimited Sport Altitude (4-Door), Unlimited Sport S (4-Door), Unlimited Willys (4-Door), Unlimited Willys Sport (4-Door), Willys (2-Door), Willys Sport (2-Door)

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

Is D/S10044432 for the passenger side?

Yes. It is the passenger side front shaft, positioned front right, for the Dana 44 AdvanTEK axle. The driver side is a separate part, D/S10044422.

Does this shaft fit a 2021 Jeep Gladiator?

Yes. It is a direct fit for the 2020–2026 Jeep Gladiator, so a 2021 Gladiator is covered. Confirm that the truck has the Dana 44 AdvanTEK front axle before ordering.

What steel is the shaft made from?

It is SAE-4340 nickel chromoly steel. That alloy strengthens the shaft at high temperature, resists abrasion, and keeps a steady hardenability through the part.

What causes a front shaft to click when turning?

A worn outer joint is the usual cause, especially when the sound is strongest on tight turns under power. Check the boot for splits and look for grease loss. Replace the shaft if the joint has play or the boot is damaged.

Should I keep a spare shaft on the trail?

It can help on remote trips, since a broken shaft can end a run. Carry the correct side and the hardware needed to fit it, and confirm the fit before the trip rather than on the trail.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop on Amazon