Select your vehicle

Dana Spicer Dana 44 AdvanTEK Front Axle Shaft (Driver Side) – 10044422

Dana Spicer

Shop on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Dana Spicer driver side inner front axle shaft for the Dana 44 AdvanTEK
  • Made from SAE-4340 nickel chromoly steel
  • Direct fit for 2018–2026 Jeep Wrangler JL and 2020–2026 Jeep Gladiator
  • Part number D/S10044422, front left position

Description

Overview

The Dana Spicer D/S10044422 is a driver side inner front axle shaft for the Dana 44 AdvanTEK front axle. It is a direct fit for the 2018–2026 Jeep Wrangler (JL) and the 2020–2026 Jeep Gladiator.

The shaft is made from SAE-4340 nickel chromoly steel, which adds toughness, high-temperature strength and abrasion resistance, and it keeps a set hardenability. It is a trail part, and it is the front left shaft of the pair, so the passenger side needs its own shaft.

Key features

  • Driver side inner front axle shaft
  • SAE-4340 nickel chromoly steel construction
  • Added toughness, high-temperature strength and abrasion resistance from the steel
  • Designed for the Dana 44 AdvanTEK front axle

Matching front shafts as a pair

On a solid front axle, the two shafts share the load of steering and drive torque, so wear on one side often shows up as a matched wear pattern on the other. Installing an old shaft from the opposite side is a poor idea, because the wear and spline fit differ. Replacing both sides together keeps the driveline balanced and reduces comeback trips.

Front shafts on a Dana 44 AdvanTEK also depend on the joints at each end and the hub seal. Inspect those while the shaft is out, check the wheel bearing, and grease the joints as the driveline requires. After any front driveline work, check the steering for free play and watch for vibration on the highway.

  • Inspect the inner seal and boot for splits
  • Check the wheel end joint for play
  • Recheck wheel fasteners after the first drive

Specifications

Brand Dana Spicer
Part number D/S10044422
Axle type Dana 44 AdvanTEK
Axle location Front
Shaft location Driver side inner
Position Front left
Material SAE-4340 nickel chromoly
Fitment type Direct fit

Vehicle fitment

It is a direct fit for the 2018–2026 Jeep Wrangler (JL), in both 2-door and Unlimited 4-door versions, and for the 2020–2026 Jeep Gladiator.

Only the vehicles above are covered. Confirm fit for your vehicle’s year, model and trim before ordering.

What’s included

One driver side axle shaft. The passenger side shaft is a separate part, Dana Spicer D/S10044432.

Fitment

VehicleYearsTrims
Jeep Gladiator2020–202680th Anniversary, Altitude, High Altitude, Launch Edition, Mojave, Overland, Rubicon, Sport, Sport S, Willys, Willys Sport
Jeep Wrangler (JL)2018–202680th Anniversary (2-Door), Freedom (2-Door), Islander (2-Door), Rubicon (2-Door), Sport (2-Door), Sport S (2-Door), Unlimited 80th Anniversary (4-Door), Unlimited Freedom (4-Door), Unlimited High Altitude, Unlimited High Altitude (4-Door), Unlimited High Altitude 4xe, Unlimited High Altitude 4xe (4-Door), Unlimited Islander (4-Door), Unlimited Moab (4-Door), Unlimited Rubicon (4-Door), Unlimited Rubicon 392, Unlimited Rubicon 392 (4-Door), Unlimited Rubicon 4xe, Unlimited Rubicon 4xe (4-Door), Unlimited Sahara (4-Door), Unlimited Sahara 4xe, Unlimited Sahara 4xe (4-Door), Unlimited Sahara Altitude (4-Door), Unlimited Sport (4-Door), Unlimited Sport Altitude (4-Door), Unlimited Sport S (4-Door), Unlimited Willys (4-Door), Unlimited Willys Sport (4-Door), Willys (2-Door), Willys Sport (2-Door)

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

Is D/S10044422 the driver side or passenger side axle shaft?

It is the driver side inner shaft, positioned front left. The passenger side shaft is a separate Dana Spicer part, D/S10044432, so a pair needs both numbers.

Will this Dana 44 AdvanTEK shaft fit a 2019 Jeep Wrangler JL?

Yes. It is a direct fit for the 2018–2026 Jeep Wrangler (JL), in 2-door and Unlimited 4-door versions, so a 2019 JL is covered. Check that your front axle is the Dana 44 AdvanTEK before ordering.

What is the axle shaft made from?

The shaft is SAE-4340 nickel chromoly steel. That alloy adds toughness, high-temperature strength and abrasion resistance, and it holds a steady hardenability through the shaft.

How can I tell if a front shaft is worn?

Common signs include a clicking noise on tight turns, a vibration under acceleration, and grease on the inside of the wheel. Inspect the inner seal and joint boots, then check the shaft for play before deciding whether it needs replacing.

Does the front shaft need a matching shaft on the other side?

Not always, but it is wise to inspect both sides. A worn shaft on one side can leave the other side with uneven wear, and matched parts keep the driveline balanced under load.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop on Amazon