Overview
The Currie CE-9081P is a pair of rear boomerang shackles for 1987-1995 Jeep Wrangler YJ models that run Pro Comp leaf springs. The boomerang shape allows the back eye of the spring to move behind the rear of the frame rail, which adds rear spring travel.
The bushings are Energy Suspension ‘Tough 88’ fluted urethane in a larger diameter, sized for the bigger eye on Pro Comp springs. Each shackle has 1/4 inch thick steel side plates, grade 8 greasable bolts with zerk fittings and a bolt-in center brace, finished in corrosion proof gold zinc.
Key features
- Boomerang shape for added rear spring travel
- Urethane bushings in the larger diameter for Pro Comp springs
- 1/4 inch thick steel side plates
- Grade 8, 1/2 inch greasable bolts with zerk fittings
- Bolt-in center brace for added rigidity
Matching the spring eye
The most important step with this shackle is matching the spring eye to the bushing diameter. Pro Comp springs have a larger eye, and the bushings are sized to that eye. If the fit is too loose, the bushing can spin or wear quickly, and if it is too tight, the bushing can be damaged during assembly.
Measure the eye before ordering and compare it with the bushing bore. Once assembled, the shackle needs routine greasing through the bolt fittings and a check of driveline clearance, since the boomerang shape changes the spring’s path. Keep the spare hardware organized so the correct bolts go back into the correct positions.
- Measure the spring eye before ordering
- Use only the bushings sized for the spring
- Recheck clearance after the first test drive
Specifications
| Brand | Currie |
|---|---|
| Part number | CE-9081P |
| UPC | 70000498033 |
| Position | Rear |
| Shape | Boomerang |
| Side plates | 1/4 inch thick steel |
| Bolts | Grade 8, 1/2 inch greasable |
| Bushings | Urethane, larger diameter for Pro Comp springs |
| Finish | Corrosion proof gold zinc |
| Quantity | Pair |
Vehicle fitment
It fits 1987-1995 Jeep Wrangler (YJ) models that run Pro Comp leaf springs.
It is intended for the YJ generation. Confirm fit for your vehicle’s year, model and trim before ordering.
Installation notes
Check that the spring eye matches the larger bushings before assembly, because these are sized for Pro Comp springs. After installation, grease the bushings through the zerk fittings and recheck rear driveline clearance.
What’s included
A pair of rear boomerang shackles with side plates, bolt-in center braces, greasable bolts and larger urethane bushings for Pro Comp springs.









