Overview
The ARB Shackle Kit, part number OMEGP2, is a greasable rear shackle pin and plate kit with a 50 mm spigot. It fits 1984–2011 and 2013–2014 Toyota Land Cruiser models in the Base trim.
It is an Old Man Emu greasable shackle and pin, so the shackle can be lubricated after fitting.
Key features
- Greasable pin and plate design
- 50 mm spigot
- Rear position
Shackles and greasing
A shackle lets the leaf spring change length as the axle moves, so the pin and bushing see constant movement. A greasable pin gives the grease a path into the moving parts, which helps limit wear and keeps out water and grit.
Grease the pin after each service and after water crossings or long dusty trails. Use a grease gun at the fitting until fresh grease shows at the seal, then wipe away the excess so grit does not collect on the pin.
Look for play when you rock the vehicle, clunking over bumps, or a pin that feels dry or grinds when moved. Check that the spigot sits fully in the mount, and re-check the fasteners after the first few trail runs.
Specifications
| Brand | ARB 4×4 Accessories |
|---|---|
| Part number | OMEGP2 |
| Kit type | Greasable pin and plate kit |
| Spigot size | 50 mm |
| Location | Rear |
Vehicle fitment
Fits the Toyota Land Cruiser in the Base trim for 1984–2011 and 2013–2014 model years.
The 2012 model year and other Toyota models are not in the list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Grease the pin after fitting, since the kit is designed to be greasable. Check the spigot size against your existing shackle before ordering.
What’s included
A greasable pin and plate kit with a 50 mm spigot.






