Overview
The Mountain Off Road Enterprises LS9091HD is a boomerang lubeable shackle for 1987-1995 Jeep Wrangler YJ models, suited to front or rear use. The shackles are laser cut from 3/8 inch steel plate rather than stamped from thinner stock.
The bolts are rifle drilled with a grease zerk, and the black polyurethane bushings are channeled so grease can flow through them. Crimp lock nuts hold the parts together. The lift is 5/8 inch and the finish is zinc plated gold.
Key features
- Boomerang shape
- Laser cut from 3/8 inch steel plate
- Rifle drilled 9/16 inch shackle bolt with grease zerk
- Channeled black polyurethane bushings
- Crimp lock nuts and grade 5 hardware on the center brace
- 5/8 inch lift listed in the short specification
Lubrication and grease flow
Lubeable shackles are designed so grease reaches the bushing and bolt without removing the assembly each time. Grease is pushed in through the zerk on the rifle drilled bolt, then moves through the channeled bushing to the pin surface. Keeping the zerk clean before greasing prevents dirt from being forced into the joint, which is a common cause of early bushing wear.
Polyurethane bushings are firmer than rubber and hold up well to regular contact with grit, but they still benefit from periodic greasing and inspection. Check for cracks, flattening or bulging at the bushing edge. Crimp lock nuts should be checked for tightness during service, and any damaged nut should be replaced rather than reused. A lifted suspension also changes joint angles, so inspect the bushings after the first few drives.
Specifications
| Brand | Mountain Off Road Enterprises |
|---|---|
| Part number | LS9091HD |
| UPC | 70000503441 |
| Location | Front or rear |
| Shape | Boomerang |
| Material | 3/8 inch laser cut steel plate |
| Shackle bolt | 9/16 inch, rifle drilled |
| Bushings | Black polyurethane, channeled |
| Hardware | Grade 5 center brace bolts, crimp lock nuts |
| Finish | Zinc plated gold |
| Lift | 5/8 inch |
| Quantity | Pair |
Vehicle fitment
The LS9091HD fitment covers the 1987-1995 Jeep Wrangler (YJ) in Base, Islander, Laredo, Renegade, Rio Grande, S, SE, Sahara and Sport trims.
Non-Wrangler models, including the CJ and Scrambler, are absent from this fitment. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Grease the shackle bolts through the zerk fittings after installation, since the channeled bushings are designed to pass grease through. Because the short specification gives a 5/8 inch lift, check driveline angles and steering alignment once the work is done.
What’s included
A pair of boomerang shackles with rifle drilled, greasable bolts, polyurethane bushings, center braces and crimp lock nuts.









