Overview
The Currie CE-9081 is a pair of rear boomerang shackles for 1987-1995 Jeep Wrangler YJ models. The boomerang shape lets the back eye of the rear leaf spring articulate behind the back end of the frame rail, which Currie says increases rear spring travel.
Each shackle is built with 1/4 inch thick steel side plates, Energy Suspension ‘Tough 88’ fluted urethane bushings and heavy duty greasable bolts. The bolts have zerk fittings on their heads for greasing the bushings, and a bolt-in center brace adds rigidity. The finish is corrosion proof gold zinc.
Key features
- Boomerang shape for articulation and added rear spring travel
- 1/4 inch thick steel side plates
- Energy Suspension ‘Tough 88’ fluted urethane bushings
- Grade 8, 1/2 inch greasable bolts with zerk fittings
- Bolt-in center brace for added rigidity
- Corrosion proof gold zinc finish
Clearance and driveline
A boomerang shackle changes where the rear spring pivots, so it changes the angle the axle moves through. On a YJ that often means more droop and articulation, but the axle also swings through a wider arc. Before running the shackles on the trail, check the rear driveline angle and brake line routing at full droop, and look for contact with the frame or crossmember.
Bump stops and shock mounts need checking too. More spring travel can bring the axle close to the bump stops at full compression, and the lower shock mount may need relocating on some setups. Look for rubbing on the shock body and sway bar links, and adjust stop height only after confirming clearance.
Shackle bushings are the other part to watch. Urethane bushings resist wear well when greased, but they still need periodic inspection. Check the bolt heads and sleeves for play, and replace the bushings if they crack or flatten. Grease through the zerk fittings after every off-road outing, and recheck the center brace bolt during regular service.
- Check driveline angle at full droop
- Inspect brake lines for stretch or contact
- Confirm bump stop and shock clearance
- Grease the bushings after off-road use
Specifications
| Brand | Currie |
|---|---|
| Part number | CE-9081 |
| UPC | 70000006144 |
| Position | Rear |
| Shape | Boomerang |
| Side plates | 1/4 inch thick steel |
| Bolts | Grade 8, 1/2 inch greasable |
| Bushings | Urethane, Energy Suspension ‘Tough 88’ fluted |
| Finish | Corrosion proof gold zinc |
| Quantity | Pair |
Vehicle fitment
It fits 1987-1995 Jeep Wrangler (YJ) models in Base, Islander, Laredo, Renegade, Rio Grande, S, SE, Sahara and Sport trims. Later Wrangler generations such as the TJ and JK are not covered. Confirm fit for your vehicle’s year, model and trim before ordering.
Later Wrangler generations such as the TJ and JK are not covered by this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Check rear driveline and brake line clearance after the shackles are installed, since the boomerang shape moves the spring eye. Grease the bushings through the zerk fittings once the assembly is in place.
What’s included
A pair of rear boomerang shackles with 1/4 inch steel side plates, bolt-in center braces, greasable bolts and urethane bushings.












