Overview
The Currie CE-9034 is a pair of rear shackles made by Currie Enterprises to replace stock rear shackles on 1976–1986 Jeep CJ5 and CJ7 and 1981–1985 Jeep Scrambler models.
The shackles use 1/4 inch thick steel side plates, Energy Suspension Tough 88 fluted urethane bushings and heavy duty greaseable bolts. They are finished in corrosion proof gold zinc and have bolt-in center braces for added rigidity.
Key features
- 1/4 inch thick steel side plates
- Energy Suspension Tough 88 fluted urethane bushings
- Grade 8, 1/2 inch greasable bolts with zerk fittings on their heads
- Bolt-in center brace for added rigidity
- Corrosion proof gold zinc finish
- Supplied as a pair
Signs of shackle wear
Rear shackles take the load of the leaf spring as it changes length, so wear shows up in the joints first. A worn shackle often causes rattling over bumps, uneven tire wear or a rear end that sways on turns. Check for play by rocking the shackle with the vehicle supported, and look for elongated bolt holes or cracked side plates.
Bolt-in center braces and bushings should be inspected at the same time, since they support the shackle assembly. Shackles and bushings are often replaced together so the parts wear evenly. Greasable bolts make routine service easier when the zerk fittings are kept clean. After any shackle work, retighten the hardware after the first few drives and recheck the bolts periodically during regular service.
Specifications
| Brand | Currie |
|---|---|
| Part number | CE-9034 |
| UPC | 50960700000 |
| Position | Rear |
| Quantity | Pair |
| Side plates | 1/4 inch thick steel |
| Bolts | Grade 8, 1/2 inch, greasable |
| Bushings | Energy Suspension Tough 88 fluted urethane |
| Center brace | Bolt-in |
| Finish | Corrosion proof gold zinc |
| Fitment type | Direct fit |
Vehicle fitment
It fits the 1976–1983 Jeep CJ5 in Base, Golden Eagle, Laredo, Limited and Renegade trims, the 1976–1986 Jeep CJ7 in Base, Golden Eagle, Golden Hawk, Laredo, Limited and Renegade trims, and the 1981–1985 Jeep Scrambler in Base, Laredo, Renegade, SL and SR trims.
Other Jeep generations and Scrambler years outside 1981–1985 are not covered. Confirm fit for your vehicle’s year, model and trim before ordering.
Installation notes
The bolt-in center braces are part of the shackle assembly, so fit them together with the shackles. Lift and support the vehicle securely before removing the stock shackles.
What’s included
A pair of rear shackles with steel side plates, urethane bushings, greasable bolts and bolt-in center braces. Check the package contents against your installation before starting.
















