Overview
The Currie CE-9035 is a pair of front tow bar shackles for 1976-1983 Jeep CJ5, 1976-1986 Jeep CJ7 and 1981-1985 Jeep Scrambler models. They replace the stock front shackles with heavy duty steel units designed to take a tow bar connection.
Currie Enterprises builds each shackle with 1/4 inch thick steel side plates, Energy Suspension ‘Tough 88’ fluted urethane bushings and grade 8 greasable bolts. A bolt-in center brace adds rigidity, and the corrosion proof gold zinc finish covers the whole assembly.
Key features
- Quick-disconnect setup for a tow bar
- Tow bar attaching pins with retaining snap clips
- 1/4 inch thick steel side plates
- Grade 8, 1/2 inch greasable bolts with zerk fittings on the heads
- Energy Suspension ‘Tough 88’ fluted urethane bushings
- Bolt-in center brace for added rigidity
- Corrosion proof gold zinc finish
Tow bar hookup considerations
A tow bar shackle sits at the front spring and carries a load that is much higher than normal driving, so its pins and clips see more wear during towing. The quick-disconnect design makes hookup faster, but it also means the pins must seat fully every time. Inspect the attaching pins and clips before each tow instead of assuming they are secure from the last trip.
Match the tow bar brackets to the attaching pins before buying. Mismatched pin diameters or worn bracket holes create play that grows under load. Keep the bushings greased, since dry urethane can squeak and wear unevenly when the bar is connected and disconnected often.
- Check pin and clip wear before each tow
- Confirm the bar brackets match the attaching pins
- Keep the bushings greased to limit squeaks
Specifications
| Brand | Currie |
|---|---|
| Part number | CE-9035 |
| UPC | 70000006052 |
| Position | Front |
| Side plates | 1/4 inch thick steel |
| Bolts | Grade 8, 1/2 inch greasable |
| Bushings | Urethane, Energy Suspension ‘Tough 88’ fluted |
| Finish | Corrosion proof gold zinc |
| Quantity | Pair |
Vehicle fitment
It fits the 1976-1983 Jeep CJ5 with Base, Golden Eagle, Laredo, Limited and Renegade trims, the 1976-1986 Jeep CJ7 with Base, Golden Eagle, Golden Hawk, Laredo, Limited and Renegade trims, and the 1981-1985 Jeep Scrambler with Base, Laredo, Renegade, SL and SR trims.
Jeep CJ3, CJ6 and Wrangler models are not on this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The kit includes the tow bar attaching pins and retaining snap clips. Grease the bushings through the zerk fittings on the bolt heads after installation. Support the axle securely on stands before removing the stock shackles.
What’s included
A pair of front shackles with side plates, bolts, urethane bushings and the bolt-in center brace, plus the tow bar attaching pins and retaining clips.
Not included: The tow bar itself.









