Overview
The Crown Automotive J0908226 is a steering knuckle seal kit for Dana 25 and Dana 27 front axles. It suits both the driver and passenger sides and fits a range of Jeep and Willys vehicles from 1941 to 1973.
Crown Automotive supplies the kit with 4 retaining plates, 2 felt seals and 2 rubber seals, a set that covers both knuckles.
Key features
- Steering knuckle seal kit for the front axle
- For Dana 25 or 27 front axles
- For driver and passenger side
- Includes retaining plates, felt seals and rubber seals
- Direct-fit design
Front knuckle seal service
The steering knuckle seals keep grease in the knuckle bearing area and keep road water and grit out of the hub. On a Dana 25 or 27, the felt and rubber seals sit behind retaining plates, so a leak can show up as grease on the brake drum or dampness at the hub. Leaking seals left alone can let the bearings run dry and wear the knuckle bushings sooner.
Seal kits are usually installed when the knuckles are opened for bushing or bearing work, so plan the job around the whole front end. Clean the knuckle bore and sealing surfaces before fitting new seals, and pack the bearings with an appropriate grease. Check the steering for play after reassembly.
- Look for grease on the brake drum or backing plate
- Check the knuckle bushings for wear
- Clean sealing faces before fitting
Specifications
| Brand | Crown Automotive |
|---|---|
| Part number | J0908226 |
| UPC | 848399079135 |
| Part type | Steering knuckle seal kit |
| Axle type | Dana 27, Dana 25 |
| Axle location | Front |
| Position | Front |
| Sides | Driver and passenger |
| Fit style | Direct fit |
Vehicle fitment
It fits 22 vehicle entries, including the 1959–1971 Jeep CJ5 and CJ6, the 1966–1971 Commando, the 1957–1964 FC150, the 1966–1967 Gladiator, the 1963–1973 Wagoneer (SJ), the J-series trucks from 1966–1970, the 1941–1942 Willys MB and Willys CJ-2, CJ-3, CJ-5, CJ-6, Sedan Delivery and 1-Ton models.
The CJ7 and Wrangler models are not on the list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The kit is for Dana 25 or 27 front axles, so the axle type on the vehicle should be identified before the knuckles are opened.
What’s included
- 4 retaining plates
- 2 felt seals
- 2 rubber seals
