Overview
The Dana Spicer Dana Ultimate 60 Steering Knuckle (Driver Side), part number 2023567 (D/S2023567), is a modified replacement front left steering knuckle for the 2007–2018 Jeep Wrangler (JK), 2-door and 4-door models. It is a direct fit.
Dana’s design, engineering, testing and manufacturing processes are built to work together. This knuckle is the driver side, front left position, and a modified replacement rather than a stock part. It can also serve as a component in Dana’s Builder Axle program. A passenger side knuckle is a separate part.
Key features
- Dana Ultimate 60 steering knuckle
- Driver side, front left position
- Modified replacement design
- Direct fit for the listed Wrangler (JK) trims
- Usable as a component in Dana’s Builder Axle program
- Genuine Spicer design, engineering, testing and manufacturing
Steering and axle work
The steering knuckle carries the hub, wheel bearing and steering arm, and it pivots on the ball joints. Because it takes steering loads and braking forces, its condition affects handling as much as its fit. A knuckle that is not a stock part can differ in fit, so check the mounting points against the rest of the front end.
Replacing a knuckle usually means reusing or replacing the ball joints, tie rod ends and hub components. Inspect each one for play and wear before reassembly. After the work, have the alignment checked, since a new knuckle can change the camber and toe setting.
- Check the ball joints for play
- Inspect tie rod ends for looseness
- Look for wear on the wheel bearing and hub
- Recheck brake line routing
Specifications
| Brand | Dana Spicer |
|---|---|
| Part number | D/S2023567 |
| Product type | Steering knuckle (Dana Ultimate 60) |
| Position | Front left (driver side) |
| Replacement or modified | Modified replacement |
| Program | Can be used in Dana’s Builder Axle program |
| Fitment type | Direct fit |
Vehicle fitment
It fits the 2007–2018 Jeep Wrangler (JK), including the 70th Anniversary, 75th Anniversary, Rubicon, Sahara, Sport, Sport S and X trims in 2-door form, and the Unlimited 70th Anniversary, Unlimited 75th Anniversary, Unlimited Rubicon, Unlimited Sahara, Unlimited Sport, Unlimited Sport S and Unlimited X trims in 4-door form.
Other Wrangler generations, such as the TJ and JL, do not fit. This is the driver side (front left) knuckle only. Check your year, model and trim before ordering.
Installation notes
Steering and axle components are safety-critical, so professional installation is recommended. Have the steering and front end inspected and a wheel alignment performed afterward.
Tighten all fasteners to the torque values for this knuckle, and follow the installation steps in order. Support the vehicle on jack stands or a lift on level ground, never on a jack alone, and re-check fastener tightness after the first miles of driving.
Because this is a modified replacement knuckle, check steering, brake and axle component fit and clearance during assembly, and follow the axle component steps closely.
What’s included
One driver side (front left) steering knuckle.
Not included: the passenger side knuckle, bearings, seals, brake components and other axle hardware.










