Overview
The Dana Spicer 36326-1 is a Grade 8 self-locking steering knuckle bolt for the front axle of 1974–1980 Jeep CJ5, CJ6, CJ7, J10 and J20 models. The bolt has a .375-24 thread, a round head and a self-locking design.
It is genuine Spicer and made in the U.S.A.
Key features
- Front steering knuckle bolt
- Thread size .375-24
- Round head, 0.625 inch head size
- Self-locking
- Grade 8
- 1.330 inch length under head, 1.550 inch overall
Why knuckle bolts matter
A steering knuckle bolt holds the knuckle to the axle assembly, so it carries steering and braking loads on every turn. Because it sits in the steering path, a bolt that stretches, corrodes or loosens can change steering feel and create play at the front wheel. Looking after these bolts is a small job with a large effect on safety.
Torque and thread condition are the main concerns. Clean threads and the bolt hole before assembly, use a torque wrench, and tighten to the value for your vehicle’s service procedure. Replace any bolt that shows stretch, thread damage or a rounded head. Check the bolts again after the first drives and after off-road use.
- Inspect threads and head for damage at each service
- Use a new bolt if the old one shows stretch
- Recheck torque after the first drives
Specifications
| Brand | Dana Spicer |
|---|---|
| Part number | 36326-1 |
| Part type | Steering knuckle bolt |
| Position | Front |
| Thread size | .375-24 |
| Head style | Round |
| Head size | 0.625 inch |
| Self-locking | Yes |
| Grade | 8 |
| Length under head | 1.330 inch |
| Overall length | 1.550 inch |
| Made in | U.S.A. |
Vehicle fitment
It fits the 1974–1980 Jeep CJ5, the 1974–1975 CJ6, the 1976–1980 CJ7, and the 1974–1980 Jeep J10 and J20 at the front axle.
Later CJ models and other Dana axle bolts are not covered by this part number. Confirm your vehicle’s year, model and trim before ordering.












