Overview
The Dana Spicer steering knuckle bolt, part number D/S2016794, is a Brakes and Steering part from Dana Spicer. Dana Spicer says its design, engineering, testing and manufacturing processes work together to deliver performance it says non-genuine parts cannot match.
It is a Universal Fit bolt, so no specific vehicle years, makes or models are identified for it.
Key features
- Made by Dana Spicer, which describes its processes as working together
- Universal Fit
- Dana Spicer part number D/S2016794
- Listed in the Brakes and Steering category
Steering knuckle bolt basics
A steering knuckle bolt holds the knuckle to its mounting point and keeps steering geometry locked in place. Because the joint carries constant load from steering and braking forces, a loose or damaged fastener can cause vibration, play in the wheel or uneven tire wear. Before installing, clean the threads and bolt bore and inspect them for galling, rust or corrosion.
Torque matters here more than with most fasteners. Use the specification from the service manual for your vehicle rather than guessing by feel, and follow any sequence the manual gives. After the first drive, recheck the fastener and look for movement around the joint. If you replace one knuckle bolt, consider whether the matching bolt on the other side has seen the same service life.
- Replace bolts that show stretching, thread damage or corrosion
- Use a torque wrench for the final tightening
- Recheck torque after initial driving
Specifications
| Brand | Dana Spicer |
|---|---|
| Part number | D/S2016794 |
| Category | Brakes and Steering |
| Fitment listed | Universal Fit |
Vehicle fitment
Fitment is not tied to a year, make or model. Check the bolt against your steering knuckle before ordering.
Confirm your vehicle’s year, model and trim before ordering.










